Agilent Technologies N2600A WireScope 350 User's ... - messkom.de
Agilent Technologies N2600A WireScope 350 User's ... - messkom.de
Agilent Technologies N2600A WireScope 350 User's ... - messkom.de
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
����������������������<br />
�������������������<br />
2 Select either Overall Budget Method or Loss/Length Method,<br />
then press Next. Continue by completing the steps in the matching<br />
section that follows.<br />
Overall Budget Method<br />
Overall Budget Method configures a fixed loss limit value for each<br />
applicable wavelength. If a multimo<strong>de</strong> SmartProbe is installed, you are<br />
asked to specify overall loss budgets for 850 nm and 1300 nm<br />
wavelengths. If a singlemo<strong>de</strong> SmartProbe is installed, you are asked to<br />
specify overall loss budgets for 1310 nm and 1550 nm wavelengths.<br />
When you select Overall Budget Method and press Next on the Loss<br />
Limit Setup screen, the screen changes to the following:<br />
1 To set the loss limit for a listed wavelength, press the wavelength<br />
field. The numeric keypad opens.<br />
2 Press the backspace arrow to erase the displayed value, then enter<br />
the new limit value. Press OK. The keypad closes.<br />
3 Press OK. The Fiber Autotest Settings screen displays.<br />
4−11
Change language