Agilent Technologies N2600A WireScope 350 User's ... - messkom.de

�����������������������
�������������������
3−16
Choosing the Connector Type
Connectors from different manufacturers have different transmission
characteristics. The WireScope 350 compensates for those differences, if
you tell it what connectors are used on the job.
1 On the Autotest Setup screen, press the connector icon, then press
Edit. The Connector Setup screen displays.
����� ���Ã������Ã���Ã��Ã���Ã�����Ã��Ã���Ã������Ã�����Ã���Ã��������Ã��Ã���Ã����Ã�����Ã���Ã��Ã���Ã
�Ã����������Ã������Ã����Ã��Ã������Ã���Ã���Ã������Ã������Ã��Ã���Ã�����Ã�����Ã��Ã���Ã
����������
2 Press the manufacturer of the connector, then Next. A list of that
manufacturer’s connectors displays.
3 Press the name of the connector, then press OK. The Autotest Setup
screen displays, with the selected connector type next to the
connector icon. If you do not see the connector on the list, see the
next section
Adding a new connector type
If you have a connector which is not in the connector database, you can
add a new connector description to the database.
1 If the manufacturer is not present, leave the manufacturer as
Unspecified. If the manufacturer is present on the list, select it, then
press Next. The Connector Setup screen is displayed. In either case,
you will be offered stored descriptions of connector types. If one of
the stored descriptions matches the connector being tested, select it,
then press OK.
2 If not, highlight Add New Description, and press Next.
3 Enter the name to be added to the database and press Next.
4 Select whether the connector is shielded or not and press Next.