Agilent Technologies N2600A WireScope 350 User's ... - messkom.de

The System Settings Menu
��������������
���������������������
The System Settings screen is a menu of controls for configuring and
viewing information about the WireScope 350.
To open one of the System Settings tools:
1 Press System on the Main Menu or Expert Mode Main Menu. The
System Settings screen displays.
2 Press the desired tool, then press Edit or View. (The label on the
large button near the bottom of the screen changes with different
selections.) The selected tool’s screen displays.
System Information: The System Information screen displays
information about the WireScope and DualRemote hardware and
software.
Save To: Opens a screen for choosing the destination for saved test
results; internal flash memory or CompactFlash card.
Power: Opens the Battery Status screen which shows the charge state
of the batteries in the WireScope and DualRemote.
Time and Date: This screen has controls for setting the date and time
on the WireScope.
User Interface: The User Interface Setup screen has controls for:
• Selecting length units
• Enabling and disabling Expert Mode
• Turning the speaker on and off
• Turning the touch-click sounds on and off
• Enabling and configuring the Sleep Timeout function
• Setting the screen brightness
2−9