Agilent Technologies N2600A WireScope 350 User's ... - messkom.de
Agilent Technologies N2600A WireScope 350 User's ... - messkom.de
Agilent Technologies N2600A WireScope 350 User's ... - messkom.de
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
.<br />
��������������<br />
�����������������������������������<br />
Connecting to Cabling for Certification<br />
2−4<br />
SmartProbes<br />
The <strong>WireScope</strong> Tester uses SmartProbes to connect to cabling runs. The<br />
Tester automatically <strong>de</strong>tects which probes are installed in the <strong>WireScope</strong><br />
and DualRemote, and selects matching test parameters.<br />
To connect the Tester to a cable run:<br />
1 Select the correct probe for the type of cabling to be certified. See<br />
Chapter 3, Certifying Copper Cabling, or Chapter 4, Certifying<br />
Fiber Cabling.<br />
2 Insert matching probes in the SmartProbe test ports at the top of the<br />
<strong>WireScope</strong> and DualRemote.<br />
3 Connect the SmartProbes to the ends of the cable run being tested.<br />
Every <strong>WireScope</strong> SmartProbe contains a memory chip that keeps track<br />
of how many tests have been performed with the probe. This data is<br />
helpful for <strong>de</strong>termining when the probe is reaching the end of its useful<br />
life.<br />
�������� �����Ã�������Ã���Ã���������Ã�����Ã��Ã�Ã�������Ã������Ã����Ã��Ã�Ã���������Ã�����Ã<br />
������������������������������������������������������������������<br />
Viewing Probe Information<br />
You can view <strong>de</strong>tailed information about the probes attached to the<br />
<strong>WireScope</strong> and DualRemote. See Viewing Probe Information, on<br />
page 6-9 for copper test probes, or on page 7-3 for fiber test probes.