Agilent Technologies N2600A WireScope 350 User's ... - messkom.de
Agilent Technologies N2600A WireScope 350 User's ... - messkom.de
Agilent Technologies N2600A WireScope 350 User's ... - messkom.de
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
��������������������������<br />
����������������������<br />
6−16<br />
6 The last Measurements Setup screen allows you to skip the automatic<br />
fault location calculation. This does not prevent you from using the<br />
locator in the Results Details function, but prevents the calculation<br />
on each test, including the passing tests. When this selection has been<br />
ma<strong>de</strong>, press Next to return to the Autotest Settings screen.<br />
Setting the Maximum Frequency<br />
The <strong>WireScope</strong> <strong>350</strong> allows you to select the maximum range for swept<br />
frequency measurements. The choices <strong>de</strong>pend somewhat on the<br />
standard selected previously, for example for Category 6, the 100 MHz<br />
choice is not available. To set the maximum frequency:<br />
1 In Expert Mo<strong>de</strong>, press Autotest on the Main menu.<br />
2 On the Autotest Setup screen press Edit Settings. On the Autotest<br />
Settings screen press Max Frequency. On the Frequency Setup<br />
screen select the maximum frequency of the data being stored.<br />
����� ���Ã������Ã��Ã������Ã���Ã������Ã���������Ã��Ã��Ã��������Ã����Ã����Ã���Ã��������Ã������Ã<br />
��������Ã���Ã����������Ã��������Ã����Ã��Ã���Ã�����������Ã�����Ã������Ã���Ã����Ã��Ã��������Ã<br />
���Ã����Ã���Ã��������Ã�����Ã���������������Ã��Ã�Ã������Ã���������Ã��������Ã����Ã���������Ã<br />
���Ã��������Ã��Ã�Ã���Ã��Ã���Ã����Ã���Ã�����Ã���Ã������Ã���������Ã�����Ã���Ã<br />
���������������Ã���Ã���Ã��Ã����������Ã���Ã��������Ã��Ã���Ã����Ã��Ã���Ã��������Ã��Ã������Ã<br />
��Ã���������Ã���Ã����Ã�������Ã����Ã�������Ã���������Ã��Ã���Ã����Ã����Ã���Ã����Ã���Ã��Ã<br />
����Ã��Ã���������Ã�����Ã����Ã���Ã������Ã����Ã��Ã��������Ã�Ã������Ã��Ã�����Ã��������Ã����Ã<br />
���������<br />
Setting the Plot Storage Requirements<br />
Another storage choice is available, whether to save plots or not. Saving<br />
plots stores the entire swept frequency measurement. Summary data is<br />
the worst case value for each test and is the minimum required for<br />
standards compliance. To set the data being stored:<br />
1 In Expert Mo<strong>de</strong>, press Autotest on the Main menu.