Agilent Technologies N2600A WireScope 350 User's ... - messkom.de
Agilent Technologies N2600A WireScope 350 User's ... - messkom.de
Agilent Technologies N2600A WireScope 350 User's ... - messkom.de
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
��������������������������<br />
����������������������<br />
2 In Expert Mo<strong>de</strong>, press Autotest. On the Autotest Settings screen,<br />
press Edit Settings, then press Profile, then press Edit.<br />
3 On the Profile Setup Screen, press Create New Profile, then press<br />
Next. Press anywhere in the Profile Name area to open a keyboard to<br />
allow you to enter the new profile name. After entering the new<br />
name, press OK, then press Next.<br />
4 Change the lock settings by pressing the appropriate boxes. The<br />
check marks toggle with subsequent presses. Then press Next. If the<br />
Test Probe setting is locked, you will see the center screen below,<br />
which will prompt you to select the Performance Gra<strong>de</strong> of the probe<br />
as well as the Probe Test Count Limit, if <strong>de</strong>sired. Then press Next. If<br />
the Test Probe setting is not locked you will go directly to the<br />
6−7