Agilent Technologies N2600A WireScope 350 User's ... - messkom.de
Agilent Technologies N2600A WireScope 350 User's ... - messkom.de
Agilent Technologies N2600A WireScope 350 User's ... - messkom.de
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
��������������������������<br />
����������������������<br />
6−6<br />
Password Screen, where you can choose to password protect your<br />
profile.<br />
3 If you choose to password protect your profile, you will be prompted<br />
to enter the password. Once you are satisfied with your password<br />
selection, press OK to return to the Autotest Settings screen, where<br />
the locks will be shown. If it is password protected, you will now be<br />
prompted to enter the password in or<strong>de</strong>r to modify this profile.<br />
Creating a New Settings Profile<br />
A new profile may be created either directly on the <strong>WireScope</strong> <strong>350</strong> or on<br />
a PC using ScopeData Pro and subsequently downloa<strong>de</strong>d into the<br />
<strong>WireScope</strong> <strong>350</strong>. To create a settings profile directly on the <strong>WireScope</strong><br />
<strong>350</strong>:<br />
1 You must configure all the Autotest Settings to the <strong>de</strong>sired settings<br />
prior to creating a new profile. Profiles created on the <strong>WireScope</strong> <strong>350</strong><br />
use the existing settings for all the parameters. See the remain<strong>de</strong>r of<br />
this section to configure the other settings.
Change language