To p - ERCO
To p - ERCO To p - ERCO
63.5 Model 14 Standard Coupling (supplied with actuator weight 1.5 lbs/0.7 kg) 28.65 28.60 57 Ø 38 200 35.5 16 33 to radius 12.5 Specification Output Torque Visual Indicator Standard 128 Ø 12000 lbf ins/1375 Nm at 100 psi/7 bar Angle of Travel (adjustable) 5 Max. 4 Mount holes each side details below 84 69.85 31 4 Accessory mount holes details below 28.58 28.53 Drive square shown at centre of travel 15.98 15.93 24.98 24.93 Shown at centre of travel 80° - 100° (restricted travel versions available) Displaced Volume 201 in 3 /3294 cm 3 Finish 308 69.85 80 Air Port/Mount Hole Details Model Air Ports Mount Holes & Accessory Mount Holes 144-100 G 1 / 2 4 x M16 x 28.5 deep on 98.8 PCD 4 x M5 x 10 deep 147-100 1 /2 NPT 4 x 5 / 8 UNC x 1.12” deep on 3.89” PCD 4 x 10-24 x 3/8” deep 2 Air ports staggered thread details below Epoxy stove enamel 380 Weight 29.5 lb/13.4 kg (excluding coupling) For further information see General Specification on page 47. Fail safe spring return units - clockwise or counter clockwise see pages 3-5 Limit switch boxes for open/close indication - various switches for hazardous areas see pages 7-10 Options Female drive and mounting details to DIN 3337 and ISO 5211 see page 48 Spring to centre see page 22 Geared manual override see page 44 37 AP pneumatic positioner - full range of options see pages 15/16 EL electropneumatic positioner - full range of options see pages 13/14 Integral solenoid valve see page 18 P3 on/off positioner - full range of options including hazardous area see pages 19-21 180° model see page 23/24 Code identification see page 57 Torque outputs see pages 55/56 See pages 48-50 for English dimensions and dimensions of spring options Accessory mount plate for positioners, switch boxes and clear cone monitor. See TD149. High Temperature / Low temperature options see page 47
Vane Slot detail both ends M6 x 12 deep 90 Standard Coupling (supplied with actuator weight 5.3 lbs/2.4 kg) R 3 49 9.55 / 9.58 30.0 / 30.2 X 6 deep 55 274 55 16 41.10 41.00 49 to radius 58.08 58.00 Ø 85 Ø Model 16 Ø 175 40.95 40.87 Shown at centre of travel 2 air ports staggered thread details below 4 Mount Holes each side details below 125 R 24 Slot both ends details above 108 30 4 Accessory Mount Holes each side details below 2 Dowel Holes Ø20.00 x 40 deep Specification Output Torque 27000 lbf ins/3100 Nm at 100 psi/7 bar 427 108 162 Angle of Travel (adjustable) Air Port/Mount Hole Details Model Air Ports Mount Holes & Accessory Mount Holes 164-100 G 1 / 2 4 x M24 x 38 deep on 152.7 PCD 4 x M5 x 8 deep 80° - 100° (restricted travel versions available) 167-100 1 /2 NPT 4 x 7 / 8 UNC x 1.50” deep on 6.012” PCD 4 x 10-24 UNC x 0.31” deep 152 Displaced Volume 530 465 in 3 /7630 cm 3 Options Finish Fail safe spring return units - clockwise or counter clockwise see pages 3-5 Limit switch boxes for open/close indication - various switches for hazardous areas see pages 7-10 AP pneumatic positioner - full range of options see pages 15/16 EL electropneumatic positioner - full range of options see pages 13/14 180° model see page 23/24 Female drive and mounting details to DIN 3337 and ISO 5211 see page 48 Spring to centre see page 22 Geared manual override see page 44 Code identification see page 57 Torque outputs see pages 55/56 See pages 48-50 for English dimensions and dimensions of spring options High Temperature / Low temperature options see page 47 Epoxy stove enamel Weight 82.5 lb/37.4 kg (excluding coupling) For further information see General Specification on page 47. 38
- Page 1 and 2: Rotary Actuators
- Page 3 and 4: Kinetrol modular concept easily pro
- Page 5 and 6: Direction of Spring Action Spring u
- Page 7 and 8: Ultimate Mounting Flexibility Low c
- Page 9 and 10: Ordering Codes Switch Type 001 2 in
- Page 11 and 12: Switch Code Switching Operation Con
- Page 13 and 14: AS Interface Configurations AS Inte
- Page 15 and 16: Application This EL positioner can
- Page 17 and 18: The AP positioner can be directly m
- Page 19 and 20: Clear Cone Monitor The optional Cle
- Page 21 and 22: Robust modulating actuator control
- Page 23 and 24: A patented part-turn rotary actuato
- Page 25 and 26: A B G x S long Output square is sho
- Page 27 and 28: F M HOLES T x V DEEP ON X P.C.D. H
- Page 29 and 30: 014-100 014P100 Standard Coupling (
- Page 31 and 32: 22 9.022 9.000 18 Ø Standard Coupl
- Page 33 and 34: 40 16.027 16.000 32 Ø Standard Cou
- Page 35 and 36: 50 23.5 to radius 19.033 19.000 38
- Page 37: 56 50 Ø Standard Coupling (supplie
- Page 41 and 42: Vane Slot detail both ends M6 x 12
- Page 43 and 44: XLS MOUNT PLATE KIT SP/ASP1607 07/0
- Page 45 and 46: Kinetrol declutchable geared overri
- Page 47 and 48: Options Double acting and spring fa
- Page 49 and 50: B G1 C Standard Actuator Actuator M
- Page 51 and 52: M (A/F) ISO Flange Female Spring Re
- Page 53 and 54: I AP Positioner Dimensions External
- Page 55 and 56: 94 (3.70") 281 (11.1") APPROX STAND
- Page 57 and 58: Double Acting Torque Outputs - Engl
- Page 59 and 60: Catalogue Index Pages Kinetrol Vane
Vane Slot detail both ends<br />
M6 x 12 deep<br />
90<br />
Standard Coupling<br />
(supplied with actuator<br />
weight 5.3 lbs/2.4 kg)<br />
R 3<br />
49<br />
9.55 / 9.58<br />
30.0 / 30.2 X<br />
6 deep<br />
55 274<br />
55<br />
16<br />
41.10<br />
41.00<br />
49 to<br />
radius<br />
58.08<br />
58.00<br />
Ø<br />
85<br />
Ø<br />
Model 16<br />
Ø<br />
175<br />
40.95<br />
40.87<br />
Shown at centre<br />
of travel<br />
2 air ports staggered<br />
thread details below<br />
4 Mount Holes<br />
each side details below<br />
125<br />
R 24<br />
Slot both ends<br />
details above<br />
108<br />
30<br />
4 Accessory Mount Holes<br />
each side details below<br />
2 Dowel Holes<br />
Ø20.00 x 40 deep<br />
Specification<br />
Output <strong>To</strong>rque<br />
27000 lbf ins/3100 Nm<br />
at 100 psi/7 bar<br />
427<br />
108<br />
162<br />
Angle of Travel<br />
(adjustable)<br />
Air Port/Mount Hole Details<br />
Model Air Ports Mount Holes & Accessory<br />
Mount Holes<br />
164-100 G 1 / 2 4 x M24 x 38 deep on 152.7 PCD<br />
4 x M5 x 8 deep<br />
80° - 100°<br />
(restricted travel<br />
versions available)<br />
167-100 1 /2 NPT 4 x 7 / 8 UNC x 1.50”<br />
deep on 6.012” PCD<br />
4 x 10-24 UNC x 0.31” deep<br />
152<br />
Displaced Volume<br />
530<br />
465 in 3 /7630 cm 3<br />
Options<br />
Finish<br />
Fail safe spring return units - clockwise<br />
or counter clockwise see pages 3-5<br />
Limit switch boxes for open/close<br />
indication - various switches for<br />
hazardous areas see pages 7-10<br />
AP pneumatic positioner - full range of<br />
options see pages 15/16<br />
EL electropneumatic positioner - full<br />
range of options see pages 13/14<br />
180° model see page 23/24<br />
Female drive and mounting details to DIN<br />
3337 and ISO 5211 see page 48<br />
Spring to centre see page 22<br />
Geared manual override see page 44<br />
Code identification see page 57<br />
<strong>To</strong>rque outputs see pages 55/56<br />
See pages 48-50 for English dimensions<br />
and dimensions of spring options<br />
High Temperature / Low temperature<br />
options see page 47<br />
Epoxy stove enamel<br />
Weight<br />
82.5 lb/37.4 kg<br />
(excluding coupling)<br />
For further information<br />
see General<br />
Specification on<br />
page 47.<br />
38