INSTRUCTION HANDBOOK - Utax
INSTRUCTION HANDBOOK - Utax INSTRUCTION HANDBOOK - Utax
Printer Settings Item Firmware version Hardware Information Memory Page Information Installed Options Network Status Emulation Consumables Status Interfaces Description The version and publication date of the loaded firmware. Shows major function setting information such as the paper size and paper type for each cassette. Shows overall installed memory, currently available memory, and current RAM disk status. Shows the current resolution, set page count, and overall page count. Shows the status of installed optional equipment. Shows the setting status of the network. The TCP/IP area shows the IP address, subnet address, and gateway address. Shows all available emulation modes. Shows the approximate remaining toner for the toner containers. The remaining toner decreases from 100 to 0. Shows all installed interfaces and the fonts and emulation configured for each interface. 3-4
Printer Settings Interface Configuration This device includes as standard equipment a parallel interface, a USB interface, and a network interface. An optional serial interface or network interface can be installed as needed. Emulation and font environments may be set individually for each of these interfaces. Interface Setting Item Send & receive mode Auto Value Change # Parallel Network USB Serial Option Printer menu NOTE: Selection of the interface tab does not specify which interface is used for receiving data. The interface is automatically selected when receiving data. Parallel Interface Mode Configuration The parallel port interface supports bidirectional communication and high-speed mode. For normal usage, leave the default setting as [Auto]. Mode Auto Normal High Speed Nibble (High) Description Automatically switches the mode to match the connected computer. For normal usage, there is no need to change this setting. Perform standard communication over the Centronics interface. Data can be transferred between this device and the computer in high speed mode. (Select this mode if data is not correctly printed when the copier is connected to a workstation) Sends and receives data in a high speed mode compliant with IEEE1284 specification. NOTE: Use a parallel interface cable compliant with the IEEE1284 specification. 1 Press the Printer key. 2 Press [Printer Menu]. 3 Press [Interface]. Select item. Printer menu Print Status Page Font Paper Handling Others Interface Page Set Color Mode Emulation Print Quality RAM DISK Mode 4 Press [Parallel] and press [Change #]. 5 Select the desired mode. 6 Press [Close]. The display is returned to the Printer menu screen. 3-5
- Page 48 and 49: Copy Functions Batch Scanning Scans
- Page 50 and 51: Copy Functions Background Exposure
- Page 52 and 53: Copy Functions Repeat Copy Set Repe
- Page 54 and 55: Copy Functions Deleting Repeat Copy
- Page 56 and 57: Copy Functions 5 Press [Copy] or [B
- Page 58 and 59: Copy Functions Selecting Output Des
- Page 60 and 61: Copy Functions Inverted Copying Cop
- Page 62 and 63: Copy Functions Auto Selection Mode
- Page 64 and 65: Copy Functions Image Repeat Copy Ti
- Page 66 and 67: Copy Functions Hue Adjust Adjust th
- Page 68 and 69: Copy Functions One touch Image Adju
- Page 70 and 71: Copy Functions MonoColor Copy Speci
- Page 72 and 73: Copy Functions 3 Press the number (
- Page 74 and 75: Copy Functions Job Build Job Build
- Page 76 and 77: Copy Functions 7 Select the MP tray
- Page 78 and 79: Copy Functions Setting Functions Th
- Page 80 and 81: Copy Functions NOTE: Incorrect copy
- Page 82 and 83: Copy Functions Repeat Copy Specify
- Page 84 and 85: Document and Output Management Func
- Page 86 and 87: Document and Output Management Func
- Page 88 and 89: Document and Output Management Func
- Page 90 and 91: Document and Output Management Func
- Page 92 and 93: Document and Output Management Func
- Page 94 and 95: Document and Output Management Func
- Page 96 and 97: Printer Settings Print Status Page
- Page 100 and 101: Printer Settings Serial Interface M
- Page 102 and 103: Printer Settings 15 Press [] or []
- Page 104 and 105: Printer Settings Emulation NOTE: Em
- Page 106 and 107: Printer Settings 6 Press desired pe
- Page 108 and 109: Printer Settings 6 Press [] or [] t
- Page 110 and 111: Printer Settings Print List of Font
- Page 112 and 113: Printer Settings Print Orientation
- Page 114 and 115: Printer Settings 5 Press the interf
- Page 116 and 117: Printer Settings Setting Color Mode
- Page 118 and 119: Printer Settings 2 Press [Printer M
- Page 120 and 121: Printer Settings 7 Press [Close]. T
- Page 122 and 123: Printer Settings 3 Press [Memory Ca
- Page 124 and 125: Printer Settings 4 In the Delete ar
- Page 126 and 127: Printer Settings 3 Press [RAM DISK
- Page 128 and 129: Printer Settings e-MPS Functions e-
- Page 130 and 131: Printer Settings 4 Press [] or [] t
- Page 132 and 133: Printer Settings Processing message
- Page 134 and 135: Printer Settings 3 Press [Configura
- Page 136 and 137: Printer Settings Setting Resource P
- Page 138 and 139: Printer Settings 4 Press [] or [] t
- Page 140 and 141: Printer Settings 5 Press [Print Sta
- Page 142 and 143: Printer Settings 3-48
- Page 144 and 145: Scanner Settings Setting Scanner Fu
- Page 146 and 147: Scanner Settings Selecting Original
Printer Settings<br />
Interface Configuration<br />
This device includes as standard equipment a parallel interface, a USB interface, and a network<br />
interface. An optional serial interface or network interface can be installed as needed.<br />
Emulation and font environments may<br />
be set individually for each of these<br />
interfaces.<br />
Interface<br />
Setting Item<br />
Send & receive mode<br />
Auto<br />
Value<br />
Change #<br />
Parallel<br />
Network<br />
USB<br />
Serial<br />
Option<br />
Printer menu<br />
NOTE: Selection of the interface tab does not specify which interface is used for receiving data. The<br />
interface is automatically selected when receiving data.<br />
Parallel Interface Mode Configuration<br />
The parallel port interface supports bidirectional communication and high-speed mode. For normal<br />
usage, leave the default setting as [Auto].<br />
Mode<br />
Auto<br />
Normal<br />
High Speed<br />
Nibble (High)<br />
Description<br />
Automatically switches the mode to match the connected<br />
computer. For normal usage, there is no need to change this<br />
setting.<br />
Perform standard communication over the Centronics interface.<br />
Data can be transferred between this device and the computer in<br />
high speed mode. (Select this mode if data is not correctly printed<br />
when the copier is connected to a workstation)<br />
Sends and receives data in a high speed mode compliant with<br />
IEEE1284 specification.<br />
NOTE: Use a parallel interface cable compliant with the IEEE1284 specification.<br />
1 Press the Printer key.<br />
2 Press [Printer Menu].<br />
3 Press [Interface].<br />
Select item.<br />
Printer menu<br />
Print Status<br />
Page<br />
Font<br />
Paper<br />
Handling<br />
Others<br />
Interface<br />
Page Set<br />
Color Mode<br />
Emulation<br />
Print<br />
Quality<br />
RAM DISK<br />
Mode<br />
4 Press [Parallel] and press [Change #].<br />
5 Select the desired mode.<br />
6 Press [Close]. The display is returned to the Printer menu screen.<br />
3-5