INSTRUCTION HANDBOOK - Utax
INSTRUCTION HANDBOOK - Utax INSTRUCTION HANDBOOK - Utax
Copy Functions Image Repeat Copy Tiles the 1 copied sheet with an original image. You can also specify the area of the original to repeat. NOTE: This function is only available when Auto-Rotate (see page 1-41) is set to [Off]. Follow the steps as below to use Image Repeat Copy. Original Copy 1 Place the original. 2 Press [Function] and then press [ Down]. 3 Press [Image Repeat]. 4 Press [Auto zoom priority]. Ready to copy. ( ) Paper Size Full-Color 11×8 100% Image Repeat ( 25~400) Shortcut Back SetOrig.Area Off Auto zoom priority # keys Off On 5 Press [+] or [–] to set the zoom size. Press [# keys] to enter with numeric keys. 6 To set the area of the original to be repeated, press [On] for Set Orig. Area and then press [Change #]. 7 Press [+] or [–] to input the area of the original to be repeated. Ready to copy. ( ) Paper Size Full-Color 11×8 100% With metric models, you can enter the border width directly using the numeric keys afer pressing [#-Keys]. Set orig. dimensions Shortcut Back ( 0~119/16 ) ( 0~1615/16) (1/16~115/8) .1/16 " .1/16 " .1/16 " Y1: Length from top left of platen to top edge of repeat area X1: Length from Height from top left of platen to left edge of repeat area Y2: Height of repeat area X2: Width of repeat area 8 Press [Close]. 9 Press the Start key. Copying begins. 1-48
Copy Functions Color Balance Adjust Adjust the strength of cyan, magenta, yellow, and black to make fine hue adjustments. NOTE: This feature is used with full color and auto color copying. This feature can not be used together with Auto Exposure mode (see Operation Guide). This feature can not be used together with One-Touch Image Adjust mode (see page 1-52). Refer to the sample image in Color Balance Adjust on page ii for examples of the effect of color balance adjustment. Follow the steps below to adjust color balance. 1 Place the original. 2 Press [Color func.] ([Colour func.]). 3 Press [Color balance] ([Colour balance]). 4 Press [On]. Ready to copy. ( ) Paper Size Full-Color 11×8 100% Color balance Shortcut Back Cyan Off On Magenta Yellow Black 5 Press [] or [] to the right of each color to be adjusted (Cyan, Magenta, Yellow, Black) to adjust each color. 6 Press the Start key. Copying begins. 1-49
- Page 14 and 15: 3 Printer Settings ................
- Page 16 and 17: xiv
- Page 18 and 19: Copy Functions Selecting Paper Sour
- Page 20 and 21: Copy Functions 4 Press [Other stand
- Page 22 and 23: Copy Functions Copy Quantity Sets t
- Page 24 and 25: Copy Functions 4 According to the p
- Page 26 and 27: Copy Functions Stapling Staples set
- Page 28 and 29: Copy Functions Punching Punch holes
- Page 30 and 31: Copy Functions Combine Mode Images
- Page 32 and 33: Copy Functions 3 Press either [2 in
- Page 34 and 35: Copy Functions Centering Originals
- Page 36 and 37: Copy Functions 4 Press [Sheet Erase
- Page 38 and 39: Copy Functions Poster For using thi
- Page 40 and 41: Copy Functions 8 Press [+] or [-] t
- Page 42 and 43: Copy Functions Booklet from Sheets
- Page 44 and 45: Copy Functions Booklets from Facing
- Page 46 and 47: Copy Functions Memo Mode Makes copi
- Page 48 and 49: Copy Functions Batch Scanning Scans
- Page 50 and 51: Copy Functions Background Exposure
- Page 52 and 53: Copy Functions Repeat Copy Set Repe
- Page 54 and 55: Copy Functions Deleting Repeat Copy
- Page 56 and 57: Copy Functions 5 Press [Copy] or [B
- Page 58 and 59: Copy Functions Selecting Output Des
- Page 60 and 61: Copy Functions Inverted Copying Cop
- Page 62 and 63: Copy Functions Auto Selection Mode
- Page 66 and 67: Copy Functions Hue Adjust Adjust th
- Page 68 and 69: Copy Functions One touch Image Adju
- Page 70 and 71: Copy Functions MonoColor Copy Speci
- Page 72 and 73: Copy Functions 3 Press the number (
- Page 74 and 75: Copy Functions Job Build Job Build
- Page 76 and 77: Copy Functions 7 Select the MP tray
- Page 78 and 79: Copy Functions Setting Functions Th
- Page 80 and 81: Copy Functions NOTE: Incorrect copy
- Page 82 and 83: Copy Functions Repeat Copy Specify
- Page 84 and 85: Document and Output Management Func
- Page 86 and 87: Document and Output Management Func
- Page 88 and 89: Document and Output Management Func
- Page 90 and 91: Document and Output Management Func
- Page 92 and 93: Document and Output Management Func
- Page 94 and 95: Document and Output Management Func
- Page 96 and 97: Printer Settings Print Status Page
- Page 98 and 99: Printer Settings Item Firmware vers
- Page 100 and 101: Printer Settings Serial Interface M
- Page 102 and 103: Printer Settings 15 Press [] or []
- Page 104 and 105: Printer Settings Emulation NOTE: Em
- Page 106 and 107: Printer Settings 6 Press desired pe
- Page 108 and 109: Printer Settings 6 Press [] or [] t
- Page 110 and 111: Printer Settings Print List of Font
- Page 112 and 113: Printer Settings Print Orientation
Copy Functions<br />
Image Repeat Copy<br />
Tiles the 1 copied sheet with an original image. You<br />
can also specify the area of the original to repeat.<br />
NOTE: This function is only available when<br />
Auto-Rotate (see page 1-41) is set to [Off].<br />
Follow the steps as below to use Image Repeat Copy.<br />
Original<br />
Copy<br />
1 Place the original.<br />
2 Press [Function] and then press [ Down].<br />
3 Press [Image Repeat].<br />
4 Press [Auto zoom priority].<br />
Ready to copy.<br />
( )<br />
Paper Size<br />
Full-Color 11×8<br />
100%<br />
Image Repeat<br />
( 25~400)<br />
Shortcut<br />
Back<br />
SetOrig.Area<br />
Off<br />
Auto zoom<br />
priority<br />
# keys<br />
Off<br />
On<br />
5 Press [+] or [–] to set the zoom size.<br />
Press [# keys] to enter with numeric keys.<br />
6 To set the area of the original to be repeated, press [On] for Set Orig. Area and then press [Change<br />
#].<br />
7 Press [+] or [–] to input the area of the<br />
original to be repeated.<br />
Ready to copy.<br />
( )<br />
Paper Size<br />
Full-Color 11×8<br />
100%<br />
With metric models, you can enter the<br />
border width directly using the numeric<br />
keys afer pressing [#-Keys].<br />
Set orig. dimensions<br />
Shortcut<br />
Back<br />
( 0~119/16 ) ( 0~1615/16) (1/16~115/8)<br />
.1/16 " .1/16 "<br />
.1/16 "<br />
Y1: Length from top left of platen to top edge of repeat<br />
area<br />
X1: Length from Height from top left of platen to left<br />
edge of repeat area<br />
Y2: Height of repeat area<br />
X2: Width of repeat area<br />
8 Press [Close].<br />
9 Press the Start key. Copying begins.<br />
1-48
Change language