INSTRUCTION HANDBOOK - Utax

Copy Functions
Batch Scanning
Scans multiple originals for a single copy job without using the optional document processor. Divide
the original into smaller sets and scan each set with the document processor. In Batch Scanning
mode, you can continue scanning originals until you press [Scanning finished].
Follow the steps as below to use batch scanning.
1 Press [Function].
2 Press [Batch Scanning].
3 Press [On].
Place originals then press Start key.
Paper Size
11×8
100%
Batch Scanning
Shortcut
Back
Off
On
Copy images from Document Proce
platen for output as one job.
4 Place the original and press the Start key.
Place the next original and press the Start key. Scan the remaining original pages in the same
manner.
When done, press [Scanning finished]. Copying begins.
1-32