INSTRUCTION HANDBOOK - Utax

Copy Functions
Booklets from Facing Pages
Copies book originals to booklets consisting of two-sided copies with facing pages. Booklets such
as magazines can be created by folding at the center. Also, thick paper or colored paper may be
inserted as a cover page.
You can change the cassette set as the paper to be used for the cover page. For further details,
refer to Specifying Cassette for Cover Paper on page 7-7.
NOTE: Original sizes that can be used with Booklets from Facing Pages are limited to 11 × 17",
8 1/2 × 11", A3, B4, A4R, B5R, A5R, 8K, and output paper size is limited to 11 × 17", 8 1/2 ×14",
11 × 8 1/2", 8 1/2 × 11", A3, B4, A4, A4R, B5 and B5R.
Use the optional 3000 sheet document finisher and folding unit to bind&fold (staple down the middle
of the finished output and fold in two). For this operation, the available paper sizes are limited to
11 × 17", 8 1/2 ×14", 81/2 × 11", A3, B4 and A4R.
Follow the steps as below for these booklet types.
1 Place the book original and press [Function].
2 Press [Booklet].
3 Press [BookBooklet].
Set first page.
Press "Start" key.
Paper Size
11×1
100%
Booklet
Off
Booklet
Book
Booklet
Book
Left
Book
Right
Open from
left
Open from
right
Shortcut
Original Finished Stitching
Off
Copy on
front cvr
Off
Saddle
Stitch
Back
Set the book or
top side direct
4 Select the original and finished types.
5 If the optional 3000 sheet document finisher and folding unit are installed, [Saddle stitch] ([Centre
Staple]) is displayed. To set bind&fold, press [Saddle stitch] ([Centre Staple]).
Press [Bind & Fold] and press [Close].
Up to 16 sheets (64 pages) can be
processed with bind&fold.
Set first page.
Paper Size
Press "Start" key. 11×1
100%
Saddle Stitch
Back
No cover
Bind &
Fold
6 To insert a cover page, press [Copy on front cvr] ([Copy on front cov.]).
7 Press [On] and press [Close].
Set cover page.
Press "Start" key.
Copy on front cover
Paper Size
11×1
100%
Back
Set the book or
top side direct
Off
On
When selecting ON for copying on the
front cover, follow the instruction.
1.Scan front cover book original.
2.Start scan book originals.
1-28