INSTRUCTION HANDBOOK - Utax
INSTRUCTION HANDBOOK - Utax INSTRUCTION HANDBOOK - Utax
Copy Functions Booklet from Sheets Delivers booklet of two-sided copies with facing pages from one-sided or two-sided originals. Booklets such as magazines can be created by folding at the center. Also, thick paper or colored paper may be inserted as a cover page. Paper for the cover page is fed from the MP tray. To supply cover paper from a cassette, refer to Specifying Cassette for Cover Paper on page 7-7. NOTE: Paper sizes available for booklet (sheet original) are limited to 11 × 17", 8 1/2 ×14", 11 × 8 1/2", 8 1/2 × 11", A3, B4, A4, A4R, B5 and B5R. Use the optional 3000 sheet document finisher and folding unit to bind&fold (staple down the middle of the finished output and fold in two). For this operation, the available paper sizes are limited to 11 × 17", 8 1/2 ×14", 81/2 × 11", A3, B4 and A4R. For binding on the left side The folded copies can be read from left to right. Original Copy For binding on the right side The folded copies can be read from right to left. Original Copy For top binding The folded copies can be read from top to bottom. Original Copy Follow the steps as below for these booklet types. 1 Press [Function]. 2 Press [Booklet]. 1-26
Copy Functions 3 Press [Booklet]. 2 sided mode. Paper Size ( Full-Color ) 11×1 100% Booklet Shortcut Back Original Finished Stitching Off Select Original I Direction. Off Booklet Book Booklet 1 sided 2-sided Left/Right 2-sided Top/Bottom Open from left Open from right Open from top Stitching Front cvr Off Saddle Stitch Top Edge 4 Select binding orientation for Original and Finished. If the message Cannot copy with these settings. Modify settings according to the original and finishing is displayed, verify that you are selecting the correct original orientation (shown at the right of the touch panel) and the correct settings for the original and finished copies. 5 If the optional 3000 sheet document finisher and folding unit are installed, [Saddle stitch] ([Centre Staple]) is displayed. To set bind&fold, press [Saddle stitch] ([Centre Staple]). Press [Bind & Fold] and press [Close]. Up to 16 sheets (64 pages) can be processed with bind&fold. 2 sided mode. ( Full-Color ) Saddle Stitch Paper Size 11×1 100% Back No cover Bind & Fold 6 To insert a cover page, press [Stitching Front Cvr] ([Stitching Front cov.]). Press [On] and press [Close]. 2 sided mode. ( ) Paper Size Full-Color 11×1 100% Stitching Front Cvr Back Off On Automatically adds covers in book binding mode using paper (color o thick) fed from a different cassette Load the paper for covers in the specified cassette. 7 Place the original and press the Start key. NOTE: When using the platen, be sure to place the originals in page order. If the original has been placed on the optional document processor, copying begins automatically. If the original is placed on the platen, Scan next original(s) is displayed. Place the next original and press the Start key. If all original pages have been scanned, press [Scanning finished]. Copying begins. 1-27
- Page 1: CDC 1520 | 1525 | 1532 INSTRUCTION
- Page 4 and 5: Color Balance Adjust Adjust the str
- Page 6 and 7: Legal and Safety Information Please
- Page 8 and 9: Monotype Imaging License Agreement
- Page 10 and 11: Included Guides The following guide
- Page 12 and 13: Originals and Paper Sizes This sect
- Page 14 and 15: 3 Printer Settings ................
- Page 16 and 17: xiv
- Page 18 and 19: Copy Functions Selecting Paper Sour
- Page 20 and 21: Copy Functions 4 Press [Other stand
- Page 22 and 23: Copy Functions Copy Quantity Sets t
- Page 24 and 25: Copy Functions 4 According to the p
- Page 26 and 27: Copy Functions Stapling Staples set
- Page 28 and 29: Copy Functions Punching Punch holes
- Page 30 and 31: Copy Functions Combine Mode Images
- Page 32 and 33: Copy Functions 3 Press either [2 in
- Page 34 and 35: Copy Functions Centering Originals
- Page 36 and 37: Copy Functions 4 Press [Sheet Erase
- Page 38 and 39: Copy Functions Poster For using thi
- Page 40 and 41: Copy Functions 8 Press [+] or [-] t
- Page 44 and 45: Copy Functions Booklets from Facing
- Page 46 and 47: Copy Functions Memo Mode Makes copi
- Page 48 and 49: Copy Functions Batch Scanning Scans
- Page 50 and 51: Copy Functions Background Exposure
- Page 52 and 53: Copy Functions Repeat Copy Set Repe
- Page 54 and 55: Copy Functions Deleting Repeat Copy
- Page 56 and 57: Copy Functions 5 Press [Copy] or [B
- Page 58 and 59: Copy Functions Selecting Output Des
- Page 60 and 61: Copy Functions Inverted Copying Cop
- Page 62 and 63: Copy Functions Auto Selection Mode
- Page 64 and 65: Copy Functions Image Repeat Copy Ti
- Page 66 and 67: Copy Functions Hue Adjust Adjust th
- Page 68 and 69: Copy Functions One touch Image Adju
- Page 70 and 71: Copy Functions MonoColor Copy Speci
- Page 72 and 73: Copy Functions 3 Press the number (
- Page 74 and 75: Copy Functions Job Build Job Build
- Page 76 and 77: Copy Functions 7 Select the MP tray
- Page 78 and 79: Copy Functions Setting Functions Th
- Page 80 and 81: Copy Functions NOTE: Incorrect copy
- Page 82 and 83: Copy Functions Repeat Copy Specify
- Page 84 and 85: Document and Output Management Func
- Page 86 and 87: Document and Output Management Func
- Page 88 and 89: Document and Output Management Func
- Page 90 and 91: Document and Output Management Func
Copy Functions<br />
3 Press [Booklet].<br />
2 sided mode.<br />
Paper Size<br />
( Full-Color )<br />
11×1<br />
100%<br />
Booklet<br />
Shortcut<br />
Back<br />
Original<br />
Finished<br />
Stitching<br />
Off<br />
Select Original I<br />
Direction.<br />
Off<br />
Booklet<br />
Book<br />
Booklet<br />
1 sided<br />
2-sided<br />
Left/Right<br />
2-sided<br />
Top/Bottom<br />
Open from<br />
left<br />
Open from<br />
right<br />
Open from<br />
top<br />
Stitching<br />
Front cvr<br />
Off<br />
Saddle<br />
Stitch<br />
Top Edge<br />
4 Select binding orientation for Original and Finished.<br />
If the message Cannot copy with these settings. Modify settings according to the original and<br />
finishing is displayed, verify that you are selecting the correct original orientation (shown at the right<br />
of the touch panel) and the correct settings for the original and finished copies.<br />
5 If the optional 3000 sheet document finisher and folding unit are installed, [Saddle stitch] ([Centre<br />
Staple]) is displayed. To set bind&fold, press [Saddle stitch] ([Centre Staple]).<br />
Press [Bind & Fold] and press [Close].<br />
Up to 16 sheets (64 pages) can be<br />
processed with bind&fold.<br />
2 sided mode. ( Full-Color )<br />
Saddle Stitch<br />
Paper Size<br />
11×1<br />
100%<br />
Back<br />
No cover<br />
Bind &<br />
Fold<br />
6 To insert a cover page, press [Stitching Front Cvr] ([Stitching Front cov.]).<br />
Press [On] and press [Close].<br />
2 sided mode. ( )<br />
Paper Size<br />
Full-Color 11×1<br />
100%<br />
Stitching Front Cvr<br />
Back<br />
Off<br />
On<br />
Automatically adds covers in book<br />
binding mode using paper (color o<br />
thick) fed from a different cassette<br />
Load the paper for covers in the<br />
specified cassette.<br />
7 Place the original and press the Start key.<br />
NOTE: When using the platen, be sure to place the originals in page order.<br />
If the original has been placed on the optional document processor, copying begins automatically.<br />
If the original is placed on the platen, Scan next original(s) is displayed. Place the next original and<br />
press the Start key.<br />
If all original pages have been scanned, press [Scanning finished]. Copying begins.<br />
1-27