INSTRUCTION HANDBOOK - Utax

Copy Functions
8 Press [+] or [–] to select the starting
page and press [Close].
Paper Size
Ready to copy. ( Full-Color )
11×8
100%
Press [# keys] ([#-Keys]) to enter with
numeric keys.
Select start #
( 1~999)
Back
Select Original I
Direction.
# keys
Top Edge
9 To specify the page to end numbering, press [Select last page] ([Setting last page]).
10 Press [Manual].
Paper Size
Ready to copy. ( Full-Color )
11×8
100%
Select last page
Back
( 0~-10)
Page
Select Original I
Direction.
Auto
Manual
Top Edge
11 Press [+] or [–] to select the starting page and press [Close].
12 For [1/n], to manually set the number for ‘n’, press [Select denominator #] ([Set Denomin. #]).
13 Press [Manual].
Ready to copy. ( )
Paper Size
Full-Color 11×8
100%
Select denominator #
( 1~999)
Back
Select Original I
Direction.
Auto
Manual
# keys
Top Edge
14 Press [+] or [–] to select the number for ‘n’ and press [Close].
Press [# keys] ([#-Keys]) to enter with numeric keys.
15 Depending on the placed original, select [Top Edge] ([Back Edge]) or [Left Top Edge] ([Left top
corner]) from Select Original Image Direction.
16 Press the Start key.
If the original has been placed on the optional document processor, copying begins automatically.
If the original is placed on the platen, Scan next original(s) is displayed. Place the next original and
press the Start key.
If all original pages have been scanned, press [Scanning finished]. Copying begins.
1-24