INSTRUCTION HANDBOOK - Utax

Appendix
Glossary
Additional Memory
Increase the memory available to the printer. Additional memory enables printing more complex
data. An additional 128 MB, 256 MB or 512 MB may be added. Contact your product service
representative to find out about memory that can be used in this machine.
AppleTalk
A standard network function provided in the Mac OS from the Apple Corporation. Also used to refer
to the protocol family used in AppleTalk network functionality. AppleTalk provides file sharing and
printer sharing services. Applications may also be launched from other computers on an AppleTalk
network.
Auto Low-Power mode
A low power mode designed for electrical power saving, activated when the machine is left unused
or data has not been received for a specific period. Less power is consumed in Low-Power mode
than in standby mode. The time until Low-Power mode is activated, which is adjustable, is set to 15
minutes by default.
Auto Paper Selection
Automatically selects the same output paper size as the original paper size when copying.
Auto Sleep mode
A mode designed for electrical power saving, activated when the machine is left unused or data has
not been received for a specific period. In Sleep mode, power consumption is kept to a minimum.
The period before switching to Sleep mode, which is adjustable, is set to 45 minutes by default.
Default gateway
The address representing the computer or router used when accessing a computer outside the local
network. If a specific gateway is not defined for the IP address being accessed, the data is sent to
the host specified by the default gateway.
DHCP (Dynamic Host Configuration Protocol)
DHCP is a protocol to automatically resolve IP addresses, subnet masks, and gateway addresses
on a TCP/IP network. Because it is not necessary to manually assign an IP address to each client
(including printers), it is especially useful to reduce the network management workload for networks
with many clients.
dpi (dots per inch)
A measure of image resolution. Indicates the number of dots in 1 inch (25.4mm).
EcoPrint
A printing mode that helps conserve toner. Prints made in this mode are thus lighter than normal.
Emulation
A function to decode and process the page description languages of other printers. This printer
provides support for PCL6, KPDL, and KC-GL emulation.
Form Feed Timeout
When sending data to a printer, there may occur time pauses. This printer includes functionality to
avoid form feeding even when data is not received for a while and continue after a pause in sent
data. Form feed timeout is a feature to wait the specified time before outputting this auto form feed
page. The printer automatically outputs a page when the wait period has exceeded the configured
form feed timeout period. However, no page is output if there is no print data on the last page.
Appendix-23