INSTRUCTION HANDBOOK - Utax
INSTRUCTION HANDBOOK - Utax INSTRUCTION HANDBOOK - Utax
Appendix Paper Basic Paper Specifications This machine is designed to print on standard printing paper as used in regular (‘dry’) copiers and page printers such as laser printers. It also supports a variety of other types of paper that conform to the specifications given in this appendix. Be careful when choosing paper. Paper unsuitable for the machine may cause jams or paper wrinkling. Use the MP tray for transparencies, labels, envelopes, and similar types of paper. NOTE: Some recycled paper does not meet requirements for use with this machine as listed in the Basic Paper Specifications shown below, such as moisture or pulp content requirements. For this reason, we recommend purchasing a small amount of recycled paper as a sample for testing prior to use. Choose recycled paper that gives the best printing results and contains low levels of paper dust. We are not responsible for any problems arising from the use of paper that does not conform to these specifications. Usable Paper Types Use standard copier paper for regular copiers or laser printers. The print quality will vary depending on the paper quality. Poor quality paper may cause unsatisfactory printing results. Basic Paper Specifications The following table lists the specifications of paper that is supported with this machine. Refer to the subsequent sections for further details. Item Specifications Weight Cassettes: 60 - 105 g/m 2 MP tray: 60 - 220 g/m 2 Weight 0.086 - 0.110 mm Dimensional accuracy ±0.7 mm Squareness of corners 90° ±0.2° Moisture Content 4 - 6 % Paper Grain Long grain (paper supply direction) Pulp content 80 % or more Appendix-2
Appendix Choosing the Appropriate Paper This section describes guidelines for choosing paper. Paper Condition Avoid using paper with bent corners or paper that is curled, dirty, or torn. Do not use paper that has a rough surface or paper fiber lint, or that is especially delicate. Use of paper in any of these conditions will not only deliver poor copies but may also cause paper jams and shorten the useful life of the machine. Choose paper with a smooth and even surface; however, avoid coated paper or paper with a treated surface as this may damage the drum or fusing unit. Constituent components Do not use coated or surface-treated papers, or paper that contains plastic or carbon. These paper may produce harmful fumes from the heat of copying and may damage the drum. For standard paper, choose paper with at least 80 % pulp content. Select products with less than 20 % cotton or other fiber content. Paper size The cassettes and MP tray support the following paper sizes. Measurements in the table take into account a dimensional variance of ±0.7 mm for length and width. Corner angles must be 90° ±0.2°. MP Tray Cassette or MP Tray B6R (128 × 182 mm) A3 (297 × 420 mm) Postcard (100 × 148 mm) B4 (257 × 364 mm) Return postcard (148 × 200 mm) A4 (297 × 210 mm) Executive (7 1/4 ×101/2") A4R (210 × 297 mm) Envelope DL (110 × 220 mm) B5 (257 × 182 mm) Envelope C5 (162 × 229 mm) B5R (182 × 257 mm) Envelope C4 (229 × 324 mm) A5R (148 × 210 mm) ISO B5 (176 × 250 mm) Folio (210 × 330 mm) Comm.#10 (4 1/8 ×91/2") 11 × 17" Comm.#9 (3 7/8 ×87/8") 8 1/2 × 14" Comm.#6-3/4 (3 5/8 ×61/2") 11 × 8 1/2" Monarch (3 7/8 ×71/2") 8 1/2 ×11" YOUKEI 2 (114 × 162 mm) 5 1/2 ×81/2" YOUKEI 4 (105 × 235 mm) 8 1/2 × 13" Input size (3 7/8 ×57/8" - 11 5/8 ×17") (98 × 148 - 297 × 432 mm) 8 1/2 ×131/2" 8K (273 × 394 mm) 16K (273 × 197 mm) 16KR (197 × 273 mm) Appendix-3
- Page 296 and 297: System Menu Capital keyboard Name t
- Page 298 and 299: System Menu 3 Press [b], [c], [d] a
- Page 300 and 301: System Menu 7-52
- Page 302 and 303: Job Accounting Overview of Job Acco
- Page 304 and 305: Job Accounting Managing Accounts Yo
- Page 306 and 307: Job Accounting 2 Press [] or [] to
- Page 308 and 309: Job Accounting Restricting FAX Usag
- Page 310 and 311: Job Accounting Restricting Printer
- Page 312 and 313: Job Accounting 3 Select the departm
- Page 314 and 315: Job Accounting By function: copying
- Page 316 and 317: Job Accounting Activating and Deact
- Page 318 and 319: Job Accounting Printer Error Report
- Page 320 and 321: Job Accounting Fax Job Accounting A
- Page 322 and 323: Job Accounting Using Job Accounting
- Page 324 and 325: Job Accounting 8-24
- Page 326 and 327: Troubleshooting Solving Malfunction
- Page 328 and 329: Troubleshooting Symptom Checkpoints
- Page 330 and 331: Troubleshooting Responding to Error
- Page 332 and 333: Troubleshooting Display Checkpoints
- Page 334 and 335: Troubleshooting Display Checkpoints
- Page 336 and 337: Troubleshooting Display Checkpoints
- Page 338 and 339: Troubleshooting Memory Device Error
- Page 340 and 341: Troubleshooting Display Checkpoints
- Page 342 and 343: Troubleshooting Scanner Error Codes
- Page 344 and 345: Troubleshooting 9-20
- Page 348 and 349: Appendix Smoothness The paper surfa
- Page 350 and 351: Appendix Choosing Special Paper Alt
- Page 352 and 353: Appendix Specifications NOTE: These
- Page 354 and 355: Appendix Scanning Performance Hardw
- Page 356 and 357: Appendix 3000 Sheet Document Finish
- Page 358 and 359: Appendix Intercompatibility of Func
- Page 360 and 361: Appendix Primary Function Auto colo
- Page 362 and 363: Appendix 22 Stapling/punching is no
- Page 364 and 365: Appendix Intercompatibility of Scan
- Page 366 and 367: Appendix Dual Access Chart Two oper
- Page 368 and 369: Appendix FTP (File Transfer Protoco
- Page 370 and 371: Appendix Appendix-26
- Page 372 and 373: Index Copy count per department Cop
- Page 374 and 375: Index Page set Copy quantity 3-17 C
- Page 376 and 377: Index Index-6
- Page 378 and 379: Quick Guide to Adjusting Image Qual
- Page 380 and 381: Quick Guide to Adjusting Image Qual
- Page 382 and 383: Quick Guide to Adjusting Image Qual
- Page 384 and 385: Quick Guide to Adjusting Image Qual
- Page 386: UTAX GmbH, Ohechaussee 235, 22848 N
Appendix<br />
Paper<br />
Basic Paper Specifications<br />
This machine is designed to print on standard printing paper as used in regular (‘dry’) copiers and<br />
page printers such as laser printers. It also supports a variety of other types of paper that conform to<br />
the specifications given in this appendix.<br />
Be careful when choosing paper. Paper unsuitable for the machine may cause jams or paper<br />
wrinkling.<br />
Use the MP tray for transparencies, labels, envelopes, and similar types of paper.<br />
NOTE: Some recycled paper does not meet requirements for use with this machine as listed in the<br />
Basic Paper Specifications shown below, such as moisture or pulp content requirements. For this<br />
reason, we recommend purchasing a small amount of recycled paper as a sample for testing prior<br />
to use. Choose recycled paper that gives the best printing results and contains low levels of paper<br />
dust.<br />
We are not responsible for any problems arising from the use of paper that does not conform to<br />
these specifications.<br />
Usable Paper Types<br />
Use standard copier paper for regular copiers or laser printers. The print quality will vary depending<br />
on the paper quality. Poor quality paper may cause unsatisfactory printing results.<br />
Basic Paper Specifications<br />
The following table lists the specifications of paper that is supported with this machine. Refer to the<br />
subsequent sections for further details.<br />
Item<br />
Specifications<br />
Weight Cassettes: 60 - 105 g/m 2<br />
MP tray: 60 - 220 g/m 2<br />
Weight<br />
0.086 - 0.110 mm<br />
Dimensional accuracy ±0.7 mm<br />
Squareness of corners 90° ±0.2°<br />
Moisture Content 4 - 6 %<br />
Paper Grain<br />
Long grain (paper supply direction)<br />
Pulp content<br />
80 % or more<br />
Appendix-2