INSTRUCTION HANDBOOK - Utax

System Menu
3 Use numeric keys to enter the 4 digit management code. The default setting is 2500 for the 25/20
ppm model and 3200 for the 32/25 and 32/32 ppm models.
If the correct management code has been entered, the Print Report Menu is displayed.
NOTE: For security, it is recommended to change the management code. For further details, refer
to Changing Management Code on page 7-25.
If the optional security kit has been installed, the management code is 8 digits long. The default
setting is 25002500 for the 25/20 ppm model and 32003200 for the 32/25 and 32/32 ppm models.
4 Press the key for the report you would like to print. Report printing begins.
NOTE: Select [Toner coverage] to print all 4 toner coverage reports at once.
5 Press [Close]. The display is returned to the System Menu screen.
7-45