INSTRUCTION HANDBOOK - Utax
INSTRUCTION HANDBOOK - Utax INSTRUCTION HANDBOOK - Utax
Copy Functions Punching Punch holes in sets of finished copies in preparation for binding. NOTE: Requires the optional 3000 sheet document finisher and punching unit. The orientations of the original and corresponding punch positions are as follows. Original Copy Orientation of Original Platen Document processor NOTE: The inch model provides two-hole and three-hole punching. The metric model provides two-hole and four-hole punching. Follow the steps as below for punching. 1 Press [Function] and then press [ Down]. 2 Press [Staple/Punch]. 1-12
Copy Functions 3 Press [2 holes] or [3 holes] for the inch model. Press [2 holes] or [4 holes] for the metric model. Staple/Punch Staple Ready to copy. ( Full-Color ) Punch Shortcut Position Back Paper Size 11×8 100% Select Original I Direction. Off Off Left side 1 staple 2 holes Right side 2 staples 3 holes Top side Top Edge 4 Select the hole punch position. 5 Place the original and press the Start key. If the original has been placed on the optional document processor, copying begins automatically. If the original is placed on the platen, Scan next original(s) is displayed. Place the next original and press the Start key. If all original pages have been scanned, press [Scanning finished]. Copying begins. 1-13
- Page 1: CDC 1520 | 1525 | 1532 INSTRUCTION
- Page 4 and 5: Color Balance Adjust Adjust the str
- Page 6 and 7: Legal and Safety Information Please
- Page 8 and 9: Monotype Imaging License Agreement
- Page 10 and 11: Included Guides The following guide
- Page 12 and 13: Originals and Paper Sizes This sect
- Page 14 and 15: 3 Printer Settings ................
- Page 16 and 17: xiv
- Page 18 and 19: Copy Functions Selecting Paper Sour
- Page 20 and 21: Copy Functions 4 Press [Other stand
- Page 22 and 23: Copy Functions Copy Quantity Sets t
- Page 24 and 25: Copy Functions 4 According to the p
- Page 26 and 27: Copy Functions Stapling Staples set
- Page 30 and 31: Copy Functions Combine Mode Images
- Page 32 and 33: Copy Functions 3 Press either [2 in
- Page 34 and 35: Copy Functions Centering Originals
- Page 36 and 37: Copy Functions 4 Press [Sheet Erase
- Page 38 and 39: Copy Functions Poster For using thi
- Page 40 and 41: Copy Functions 8 Press [+] or [-] t
- Page 42 and 43: Copy Functions Booklet from Sheets
- Page 44 and 45: Copy Functions Booklets from Facing
- Page 46 and 47: Copy Functions Memo Mode Makes copi
- Page 48 and 49: Copy Functions Batch Scanning Scans
- Page 50 and 51: Copy Functions Background Exposure
- Page 52 and 53: Copy Functions Repeat Copy Set Repe
- Page 54 and 55: Copy Functions Deleting Repeat Copy
- Page 56 and 57: Copy Functions 5 Press [Copy] or [B
- Page 58 and 59: Copy Functions Selecting Output Des
- Page 60 and 61: Copy Functions Inverted Copying Cop
- Page 62 and 63: Copy Functions Auto Selection Mode
- Page 64 and 65: Copy Functions Image Repeat Copy Ti
- Page 66 and 67: Copy Functions Hue Adjust Adjust th
- Page 68 and 69: Copy Functions One touch Image Adju
- Page 70 and 71: Copy Functions MonoColor Copy Speci
- Page 72 and 73: Copy Functions 3 Press the number (
- Page 74 and 75: Copy Functions Job Build Job Build
- Page 76 and 77: Copy Functions 7 Select the MP tray
Copy Functions<br />
Punching<br />
Punch holes in sets of finished copies in preparation for binding.<br />
NOTE: Requires the optional 3000 sheet document finisher and punching unit.<br />
The orientations of the original and corresponding punch positions are as follows.<br />
Original<br />
Copy<br />
Orientation of Original<br />
Platen Document<br />
processor<br />
NOTE: The inch model provides two-hole and three-hole punching. The metric model provides<br />
two-hole and four-hole punching.<br />
Follow the steps as below for punching.<br />
1 Press [Function] and then press [ Down].<br />
2 Press [Staple/Punch].<br />
1-12
Change language