INSTRUCTION HANDBOOK - Utax

System Menu
Select the Main Mode
Specify the screen to be first shown after power-on. The setting items are as follows.
Item
Copy Mode
FAX Mode
Description
Copy mode is set as the first screen to be shown after the power is
switched on (the screen shown when the Copier key is pressed).
Fax mode is set as the first screen to be shown the power is switched
on (the screen shown when the Fax key is pressed).
NOTE: This setting is displayed when the optional fax kit is installed.
1 Referring to Accessing the Machine Default Screen on page 7-13, access the Machine Default
screen.
2 Press [] or [] to select Select the main mode (Select main mode) and press [Change #].
3 Select [Copy Mode] or [Fax Mode].
4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Machine
Default screen.
Setting Notification Sounds
Set the notification sounds made by the machine during operation. The setting items are as follows.
Item
Touch tone notification
Finish notification
Ready notification
Attention notification
Description
The beep sound made when a key on the operation panel or touch
panel is pressed.
The sound made when a copy or print operation finishes without error.
The sound made when warm-up is complete.
The sound made when an error has occurred.
Set each item to [On] to enable sound notification. Set each item to [Off] to disable sound
notification.
1 Referring to Accessing the Machine Default Screen on page 7-13, access the Machine Default
screen.
2 Press [] or [] to select Notify (Touch tone), Notify (Finish), Notify (Ready) or Notify (Attention)
and press [Change #].
3 Select [Off] or [On].
4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Machine
Default screen.
7-23