INSTRUCTION HANDBOOK - Utax

System Menu
Selecting Output Destination
Set the default copy output destination.
Paper Output
Top tray
Job separator
Finisher tray
Tray A
Tray B
Tray C
Tray 1 - 7
Description
Outputs to the built-in output tray.
Outputs to the optional job separator.
Outputs to the optional document finisher tray.
Outputs to Tray A of the optional 3000 sheet document finisher.
Outputs to Tray B of the optional 3000 sheet document finisher.
Outputs to Tray C of the optional 3000 sheet document finisher.
Outputs to Trays 1 - 7 (1 is the uppermost tray) of the optional mailbox.
NOTE: This setting is displayed when the optional job separator, document finisher or 3000 sheet
document finisher is installed.
1 Referring to Accessing the Machine Default Screen on page 7-13, access the Machine Default
screen.
2 Press [] or [] to select Select Copy output mode and press [Change #].
3 Select the output destination.
4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Machine
Default screen.
Selecting FAX Output Mode
Set the default output destination for printing originals or reports received by fax.
Paper Output
Top tray
Job separator
Finisher tray
Tray B
Tray 1 - 7
Description
Outputs to the built-in output tray.
Outputs to the optional job separator.
Outputs to the optional document finisher tray.
Outputs to Tray B of the optional 3000 sheet document finisher.
Outputs to Trays 1 - 7 (1 is the uppermost tray) of the optional mailbox.
NOTE: This setting is displayed when the fax kit and optional job separator, document finisher or
3000 sheet document finisher is installed.
1 Referring to Accessing the Machine Default Screen on page 7-13, access the Machine Default
screen.
2 Press [] or [] to select Select FAX output mode and press [Change #].
3 Select the output destination.
4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Machine
Default screen.
7-22