INSTRUCTION HANDBOOK - Utax

System Menu
2 Press [Copy Default].
System Menu / Counter
System Menu
Copy
Default
Language
Job
Accounting
Scanner
Default
Printer
Default
MP tray
Setting
BOX
Management
Machine
Default
Document
Management
Register
Orig. Size
Print
Report
3 Use numeric keys to enter the 4 digit management code. The default setting is 2500 for the 25/20
ppm model and 3200 for the 32/25 and 32/32 ppm models.
If the correct management code has been entered, the Copy Default screen will be displayed.
NOTE: For security, it is recommended to change the management code. For further details, refer
to Changing Management Code on page 7-25.
If the optional security kit has been installed, the management code is 8 digits long. The default
setting is 25002500 for the 25/20 ppm model and 32003200 for the 32/25 and 32/32 ppm models.
4 Refer to the following configuration items to configure the default settings.
Exposure Mode
Set the exposure mode for default settings mode. The setting items are as follows.
Item
Manual
Auto
Description
Sets manual copy exposure mode.
Sets automatic copy exposure mode.
For further information regarding exposure mode, see Operation Guide.
1 Referring to Accessing the Copy Default screen on page 7-2, access the Copy Default screen.
2 Press [] or [] to select Exposure Mode and press [Change #].
3 Select [Manual] or [Auto].
4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Copy Default
screen.
Exposure Steps
Change the exposure adjustment step amount. The setting items are as follows.
Item
Description
1 step 7 exposure adjustment steps are available.
0.5 step 13 more accurate exposure adjustment steps are available.
1 Referring to Accessing the Copy Default screen on page 7-2, access the Copy Default screen.
2 Press [] or [] to select Exposure Steps and press [Change #].
3 Select [1 step] or [0.5 step].
4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Copy Default
screen.
7-3