INSTRUCTION HANDBOOK - Utax

INSTRUCTION HANDBOOK - Utax INSTRUCTION HANDBOOK - Utax

31.12.2014 Views

Copy Functions 4 According to the placed orientation of the original, press [Top Edge] ([Back Edge]) or [Left Top Edge] ([Left top corner]). to copy. tion ( Full-Color ) Shortcut Back Paper Size Set 11×8½" 100% Select Original Image Direction. Close "Select Original Image Direction." can be shown at right side of display. Follow the steps. If setting mode is wrong, incorrect copy will result. Top Edge Left Top Edge 5 Press [Close]. 6 Configure the functions which require specification of the original orientation, such as Duplex mode. 7 Press the Start key. Copying begins. 1-8

Copy Functions Offset Mode Outputs printed copies such that each set is stacked perpendicular (rotated 90 degrees) to the previous set. NOTE: Use of this feature requires paper of the same size must be loaded in the different cassettes with portrait and landscape orientations. 3 2 1 3 2 1 3 2 1 3 2 1 Only 11 × 8 1/2", A4, B5 and 16K paper sizes may be used with Offset mode. Original Copy Follow the steps as below for using Offset mode. 1 Press [Function]. 2 Press [Sort/Offset] ([Sort/Group]). 3 Press [On] ([1 set] or [Output each page]). Ready to copy. ( ) Paper Size Full-Color 11×8 100% Sort/Offset Shortcut Back Sort Offset Sort:Off Sort:On Off On 4 Use the numeric keys to enter the copy quantity. 5 Place the original and press the Start key. Copying begins. If the original has been placed on the optional document processor, copying begins automatically. If the original is placed on the platen, Scan next original(s) is displayed. Place the next original and press the Start key. If all original pages have been scanned, press [Scanning finished]. Copying begins. Copied pages are output to the output tray offset per each set. 1-9

Copy Functions<br />

4 According to the placed orientation of<br />

the original, press [Top Edge] ([Back<br />

Edge]) or [Left Top Edge] ([Left top<br />

corner]).<br />

to copy.<br />

tion<br />

( Full-Color )<br />

Shortcut<br />

Back<br />

Paper Size Set<br />

11×8½"<br />

100%<br />

Select Original Image<br />

Direction.<br />

Close<br />

"Select Original Image Direction." can<br />

be shown at right side of display.<br />

Follow the steps. If setting mode is<br />

wrong, incorrect copy will result.<br />

Top Edge<br />

Left Top<br />

Edge<br />

5 Press [Close].<br />

6 Configure the functions which require specification of the original orientation, such as Duplex mode.<br />

7 Press the Start key. Copying begins.<br />

1-8

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!