INSTRUCTION HANDBOOK - Utax

Setting Scanner from a Web Browser
Basic - Black and White Mode
The setting items are as follows.
Setting Item Value Description
Orig. image
quality
Photo, Text, Text+Photo, OCR
Select from the following four modes
depending on the type of original being
scanned.
File Type TIFF, PDF Specify the file type when saving a
scanned image.
Basic - Color/Monochrome (Gray) Mode
The setting items are as follows.
Setting Item Value Description
Density
Adjustment (Auto)
-3 – +3 When density adjustment is set to
Auto, adjusts the overall dark/light
balance.
Density
Adjustment
(Manual)
File Type
-3 – +3 When density adjustment is set to
Manual, adjusts the overall dark/light
balance.
JPEG, PDF, High Compression PDF Specify the file type when saving a
scanned image.
PDF/JPEG Quality 1 (Low), 2, 3 (Standard), 4, 5 (High)
High Compression
PDF Quality
Output Color Type RGB, sRGB
1 (Compression Ratio Priority), 2,
3 (Quality Priority)
Specify PDF and JPEG quality.
Sets high compression PDF quality.
Configure the color output type.
Basic - Universal mode
The setting items are as follows.
Setting Item Value Description
Resolution 600dpi, 400dpi, 300dpi, 200dpi Select from the following four
resolutions to scan an original.
Multiple scanning On, Off
Select whether to scan originals in a
continuous operation.
File Name Enter the filename using less than 16
characters.
Specify the name used when saving
scanned images.
5-11