INSTRUCTION HANDBOOK - Utax

Scanner Settings
Programmed Scanning
Up to 5 different combinations of destination, sending mode and functions can be registered for
programmed scanning. After registering sets of frequently used destinations and modes as a single
program, simply press the program number to recall those settings. You can also name the
programs to identify them.
NOTE: When registering programmed scanning, up to 20 destinations can be specified for
simultaneous transmission.
Registering Programs
Follow the steps as below to register a program.
1 Set the desired destination and sending
mode (example: Group A, Scan to PC,
PDF file, etc. and press [Register
Prgrm].
Ready to scan. ( Full-Color )
Place the original and select destination.
Scan to PC-Sending
Destination
Group A
Register Prgrm
Auto
Select
Orig.Size
Original
11×8½"
08/0
Cont. TX to
Top Edge
Orig. Set
Direction
Save at
User PC
Address
Book
Delete
Auto size
Select
Send Size
Basic
200dpi
Scanning
Resolution
Quality
2 Press [Register].
Select item.
08/0
Registering Programs Menu
Register
Delete
Change
Name
3 Press the number (1 to 5) of the program
to register.
Register present setting
Select program number.
No registration
No registration
No registration
No registration
No registration
4 Enter the program name and press
[End].
play
Stop
Char.Limit:16 letters including #
End
NOTE: Refer to Character Input
Method on page 7-47 for how to enter
text characters.
AllDel.
Del. prev
Letter
Num./Sym.
Space
5 Press [Yes]. The program is registered.
4-20