INSTRUCTION HANDBOOK - Utax

Scanner Settings
Border Erase
Removes black borders from around the edges of originals.
Function Value Description
Sheet Erase
(Border Erase)
Book Erase
Individual
BorderErase
(Individual Erase
Mode)
Off
Inch models
Border: 0 - 2" (1/8" increments)
Metric models
Border: 0 - 50 mm
Inch models
Border: 0 - 2" (1/8" increments)
Center: 0 - 2" (1/8" increments)
Metric models
Border: 0 - 50 mm
Center: 0 - 50 mm
Inch models
Top: 0 - 2" (1/8" increments)
Bottom: 0 - 2" (1/8" increments)
Left: 0 - 2" (1/8" increments)
Right: 0 - 2" (1/8" increments)
Metric models
Top: 0 - 50 mm
Bottom: 0 - 50 mm
Left: 0 - 50 mm
Right: 0 - 50 mm
Use this mode to erase black borders
around single sheet originals.
Use this mode to erase black borders that
develop around the edges and in the
middle when scanning originals such as
thick books. You can specify the widths
individually to erase the borders around
the edges and in the center of the book.
Use this mode to individually specify
border widths to erase on all sides.
Do not erase borders.
NOTE: See Border Erase on page 1-19 for how to configure Border Erase.
Batch Scanning
After scanning an original, you can continue scanning a new original. When this feature is enabled,
after an original is scanned, a selection screen prompts whether to continue scanning originals.
Item
On
Off
Description
Enables batch scanning.
Disables batch scanning.
NOTE: For TWAIN image scanning, batch scanning is available when Wait for Scan is enabled.
Auto Selection
Scan differently sized originals in one operation when placed in the optional document processor.
Item
On
Off
Description
Enables Auto Selection.
Disables Auto Selection.
NOTE: For Auto Selection operation, see Auto Selection Mode on page 1-46.
4-8