INSTRUCTION HANDBOOK - Utax

Scanner Settings
File Name Input
Specify a filename to assign to a scanned image.
Item
Auto
Manual
Description
Automatically assign a filename.
The file name can be changed. Press [Change Name] and input the filename.
NOTE: This selection is not available for TWAIN and Database Connection.
Enter the filename using less than 20 characters.
To change the filename specified under default settings mode, refer to File Name on page 4-16.
When File Name Input on page 4-18 is set to [Manual], The filename input screen is shown without
first showing the auto/manual selection screen.
File Type
Specify the image file format.
Item Image Adjust Available color modes
JPEG Color&Gray 1 - 5 Full color, Auto color † , Grayscale
(JPEG Col. Grey)
TIFF B&W – Black&White
PDF 1 - 5 Full color, Auto color, Grayscale, Black&White
HiComp. PDF Color 1 - 3 Full color
† Auto Color is available only when [Gray scale] is selected for B&W Setting.
NOTE: When file type is set to [JPEG Color&Gray] ([JPEG Col. Grey]), originals read in one
operation are sent as one file per page.
[HiComp. PDF Color] is displayed only when the optional PDF upgrade kit is installed.
The PDF encryption function is available when the optional PDF upgrade kit is installed. For further
details, refer to PDF Encryption Function on page 4-9.
4-5