INSTRUCTION HANDBOOK - Utax

Scanner Settings
Selecting Original Size
Select the original size (scanning area).
Item
Select size
Input size
Original Size
Inch models
Auto, 11 × 17", 8 1/2 ×14", 11×81/2", 8 1/2 ×11", 81/2 ×51/2", 51/2 ×81/2",
11 × 15", 8 1/2 ×131/2", 8 1/2 × 13", A4, A4R
Metric models
Auto, A3, B4, A4, A4R, B5, B5R, A5, A5R, B6, B6R, 11 × 15", 11 × 8 1/2",
8 1/2 ×11", Folio
Inch models
Vertical (Y): 2 - 11 5/8"
Horizontal (X): 2 - 17"
Metric models
Vertical (Y): 50 - 297 mm
Horizontal (X): 50 - 432 mm
Other stand. Size Inch models
(Others stand. Size) A3, B4, B5, B5R, A5, A5R, B6, B6R, Folio, 8K, 16K, 16KR, and custom sizes
Metric models
11 × 17", 8 1/2 × 14", 5 1/2 ×81/2", 8 1/2 ×51/2", 8 1/2 ×131/2", 8 1/2 ×13", 8K,
16K, 16KR, and custom sizes
NOTE: For manual size input, place the original flush against the top left of the platen and set the
area to be scanned.
For scanning resolution, refer to Scan Resolution on page 4-4.
Select Sending Size
Select the sending size (size of image to send).
The following send sizes are available.
Auto size, 11 × 17", 11 × 15", 8 1/2 ×14", 81/2 ×131/2", 8 1/2 ×13", 81/2 ×11", 51/2 ×81/2", A3, B4,
A4, B5, A5, B6, Folio, 8K, 16K
NOTE: Not available when an custom original size has been specified.
For scanning resolution, refer to Scan Resolution on page 4-4.
4-3