INSTRUCTION HANDBOOK - Utax

Printer Settings
Network Status Page
The network status page can be printed when printing the status page. Use the network status page
to verify the network interface firmware version, network address and network protocol information.
The default setting is [Off] (Do not print).
1 Refer to steps 1 - 4 of TCP/IP Settings on page 3-6 to display the Interface screen.
2 Press [] or [] to select Network
Status Page and press [Change #].
Interface
Setting Item
NetWare
TCP/IP
Ethertalk
Network Status Page
Value
On
On (Not specified)
On
Off
Change #
Parallel Network USB
Printer menu
3 Press [On] or [Off].
4 Press [Close]. The display returns to the Interface screen.
5 Press [Close]. The display is returned to the Printer menu screen.
3-9