INSTRUCTION HANDBOOK - Utax

Printer Settings
1 Press the Printer key.
2 Press [Printer Menu].
3 Press [Interface].
Select item.
Printer menu
Print Status
Page
Font
Paper
Handling
Others
Interface
Page Set
Color Mode
Emulation
Print
Quality
RAM DISK
Mode
4 Press [Network].
NOTE: To set the optional network interface, press [Option].
5 Press [] or [] to select TCP/IP and
press [Change #].
Interface
Setting Item
Value
NetWare
TCP/IP
Ethertalk
Network Status Page
On
On
On
Off
Change #
Parallel
Printer menu
Network
USB
6 Press [On].
7 Press [] or [] to select DHCP and press [Change #].
8 Press [On] or [Off] and press [Close].
9 Press [] or [] to select BOOTP and press [Change #].
10 Press [On] or [Off] and press [Close].
11 Press [] or [] to select IP Address and press [Change #].
12 Enter the IP address using the numeric
keys. Input the address for the 3 digits
displayed in reverse black and white and
press the # key.
IP Address
Confirm per 3 lines pressing # key.
.10 .0 .0 .0 (with #key)
Back
Printer menu- Interface - Network - TCP/IP
13 Input the address for the next 3 digits displayed in reverse black and white and press the # key.
To correct an address entry, press the # key to select the 3 digit address you would like to correct
and reenter the address using the numeric keys.
14 After inputting the rest of the address in the same manner, press [Close]. The display returns to the
TCP/IP Settings screen.
Press [Back] to reset the entered address and set the previous address.
3-7