Hand tools - Inolec

HAND TOOLS CATALOGUE 2010
WARRANTY POLICY
JET EQUIPMENT & TOOLS LTD.
Lifetime Warranty Replacement of Defective Product
Adjustable Wrenches (2)
Pipe Wrenches (2)
Aviation Snips
Pliers
Bolt Cutters (handles only) Power Sockets & Accessories
Chrome Sockets & Accessories (1) Punches and Chisels
Clamps (4)
Ratchet Bodies (2) (4)
Combination Wrenches (2) Screwdrivers (3)
Construction Measuring Tools (6) Tool Boxes (5)
Crowfoot Wrenches
Vises (4)
Flare Nut Wrenches (2)
Pipe Cutters (excludes cutting
Flex Bars (2)
wheels or blades)
Gear Pullers (7)
Wire Strippers
Hammers (heads only)
Picks, Hooks and Scrapers
Hex Key Wrenches
Staplers
Nut Drivers
Riveters
1 – Rounded drive corners void warranty
2 – Snipe or hammer marks void warranty
3 – Hammer marks or bent shafts void warranty
4 – Bent or broken handles void warranty
5 – Evidence of drawer overload voids warranty
6 – Bent, broken or torn blades voids warranty
7 – Rounded drive corners or stripped threads void warranty
Two Year Warranty Replacement of Defective Product
Torque Wrenches
Dropping or striking against hard objects, using for removal of
fasteners, or failure to return wrench to lowest setting can all
contribute to loss of accuracy and is not the fault of the tool.
CALIBRATION IS NOT COVERED BY WARRANTY
One Year Warranty Replacement of Defective Product
Hose Reels (hose is discretionary based on examination)
Lubricating Equipment (seals and hoses excluded)
Torque Multipliers
Precision Measuring Tools
Electronic Measuring Tools
Thermometers
NOTE: Batteries supplied with certain products may have been
exposed to a long shelf life resulting in low energy or dead batteries.
Please source replacement batteries locally.
Dead batteries do not constitute a warranty claim.
Repairable Wear Parts
Flex Bar Swivels, Ratchet Repair Kits, Torque Wrench Repair Kits,
Pipe Wrench Jaws, Springs and Knurls, Bolt Cutter heads, Bench
Vise (excluding casting).
Two Year Limited Warranty
Machinery
NOTE: Specifically excluded from this guarantee are reducing
adaptors, hacksaw blades, thin wall power sockets, mag wheel
power sockets, power bits and insert bits and accessories.
Warranty Procedure
Any JET hand tool product for which there is a warranty claim
should be returned prepaid to an authorized JET hand tool
distributor or service centre along with proof of purchase and an
explanation of the defect.
www.jetequipment.com
235