Chapter 1. IBM Flex System FC3171 8 Gb SAN Switch - QLogic

Table 16 describes the SNMP v3 User Editor dialog parameters. After configuring
the user, click the OK button to save the settings and close the dialog.
Table 16. SNMP v3 User Editor dialog
Parameter
User Name
Group
Authentication Type
Authentication
Phrase
Confirm Authentication
Phrase
Privacy Type
Privacy Phrase
Confirm Privacy
Phrase
Description
Name for this SNMP v3 user.
Read Only. This parameter permits the user to view only SNMP v3
user settings. Read Write permits user to view and change SNMP
v3 user settings.
None, MD5, SHA. If None, no authentication phrase is required.
MD5 and SHA require an authentication phrase.
A unique string or phrase to serve as an password-like authentication
phrase.
Re-enter the same unique string or phrase to serve as a password-like
authentication phrase.
DES or None. If None, no privacy phrase is required.
A unique string or phrase to serve as a password-like privacy
phrase.
Re-enter the unique string or phrase to serve as a password-like
privacy phrase.
Archiving a switch
You can create an .XML archive file containing the configuration parameters.
Basically, any data received by QuickTools is archived. This archive file can be used
to restore the configuration on the same switch or on a replacement switch. You can
also use the archive file as a template for configuring new switches to add to a
fabric. Passwords are not archived. Security Group secrets are not included in the
archive and must be re-configured using the CLI after a restore operation.
Archived parameters include the following:
• Switch properties and statistics
• IP configuration
• SNMP configuration
• Port properties and statistics
• Alarm configuration
• Zoning configuration
• Nicknames configuration
• User account information (but not restored)
• Configured device security (only with SSL connection to the switch)
• RADIUS Server information (only with SSL connection to the switch)
Chapter 4. Managing switches 69