Chapter 1. IBM Flex System FC3171 8 Gb SAN Switch - QLogic

Table 7. Switch data window entries (Continued)
Entry
Broadcast Support
NTP Client Enabled
NTP Server Address
Use Front Port
DNS Enabled
Configured Local
Hostname
IPv6 Assigned Address
(1–20)
Assigned Hostname
Description
Broadcast support status. Broadcast support is enabled
(default) or disabled.
Enabled or disabled. Allows for switches to synchronize
their time to a centralized server
The IP address of the centralized NTP server. Ethernet connection
to NTP server is required.
N/A—does not apply to this switch
DNS enabled status
Hostname for the switch. If a fully qualified domain name
is given, the domain suffix is used as the first suffix in the
DNS search list for DNS lookups performed by the switch.
The set of IPv6 addresses assigned by DHCPv6, NDP, or the
switch administrator
Name assigned to host
User Login Group
User Name
Login Level
Super User
UserAuthentication
Enabled
Account name
Authority level
Super user privileges enabled/disabled
Enforcement of account names and authority (always True)
Firmware Group
Firmware Version
Inactive Firmware Version
Pending Firmware Version
PROM/Boot Version
Active firmware version
N/A—does not apply to this switch
Firmware version that will be activated at the next reset
PROM firmware version
Services Group
NTP Client Enabled
NTP Server Address
FDMI Enable
FDMI HBA Entry Limit
Enabled or disabled. Allows for switches to synchronize
their time to a centralized server
The IP address of the centralized NTP server. Ethernet connection
to NTP server is required.
Fabric Device Management Interface status. If enabled,
device information can be obtained, managed, and saved
through the fabric using Name Service Management Server
functions. QuickTools will report all FDMI information
reported by the entry switch, if FDMI is enabled on the
entry switch.
Maximum number of adapters that can be registered with a
switch
Chapter 4. Managing switches 45