Chapter 1. IBM Flex System FC3171 8 Gb SAN Switch - QLogic

Table 7. Switch data window entries (Continued)
Entry
Power Supply 2 Status
Temperature Failure Port
Shutdown
Board Temperature
Board Warning
Temperature
Board Failure Temperature
POST Status
POST Fault Code
Test Status
Test Fault Code
Description
NA—does not apply to this switch
Non-configurable (always enabled for this switch). All
ports are shut down when the switch temperature exceeds
the failure temperature.
Current internal temperature in degrees Celsius
Non-configurable temperature threshold (65° Celsius)
above which a warning condition alarm is generated
Non-configurable temperature threshold (70° Celsius)
above which a failure condition alarm is generated
Status from the most recent Power On Self Test
Fault code from the most recent Power On Self Test
The current diagnostic test status for the switch
The code value for the last recorded diagnostic test status
recorded on the switch
Network Group
IPv4 Enabled
IPv4 Address
IPv4 Subnet Mask
IPv4 Gateway
IPv6 Enabled
IPv6 Address
IPv6 Gateway
Eth1 IPv4 Address
Eth1 IPv4 Subnet Mask
Eth1 IPv4 Gateway
Eth1 IPv6 Address
Eth1 IPv6 Gateway
CPU0 MAC Address
CPU1 MAC Address
SNMP Enabled
SNMP v3 Security Enabled
Internet Protocol version 4 enabled status
Internet Protocol version 4 IP address for the External management
port
Mask that determines the IP address subnet
Gateway address
Internet Protocol version 6 enabled status
Mask that determines the IP address subnet for the External
management port
Gateway address
Mask that determines the Eth1 IPv4 address for the Internal
management port
Mask that determines the IPv4 address subnet for Eth1
Gateway address
Mask that determines theIPv6 IP address for Eth1 for the
External management port
Gateway address
NA—does not apply to this switch
NA—does not apply to this switch
SNMP enabled or disabled
SNMP v3 security enabled or disabled
44 IBM Flex System FC3171 8 Gb SAN Switch QuickTools User’s Guide