Chapter 1. IBM Flex System FC3171 8 Gb SAN Switch - QLogic

Active Zone Set data window
The Active Zoneset data window, shown in Figure 9, displays the zone membership
for the active zone set that resides on the fabric management switch. The active zone
set is the same on all switches in the fabric. To open the Active Zoneset data
window, click the Active Zoneset tab below the data window.
The Active Zoneset data window uses display conventions for expanding and
contracting entries that are similar to the fabric tree. An entry handle located to the
left of an entry in the tree indicates that the entry can be expanded. Click this handle
or double-click the following entries:
• A zone set entry expands to show its member zones.
• A zone entry expands to show its member ports/devices.
• Ports/devices that are zoned by WWN or FC address, but no longer part of the
fabric, are grayed-out.
Active Zoneset
Data Window
Figure 9. Active Zone Set Data window
24 IBM Flex System FC3171 8 Gb SAN Switch QuickTools User’s Guide