Chapter 1. IBM Flex System FC3171 8 Gb SAN Switch - QLogic

Opening QuickTools
After the switch is operational, open QuickTools by entering the switch IP address
in an Internet browser (use “https://”, not “http”). If your workstation does not
have the Java 2 Run Time Environment program, you will be prompted to
download it. The Add a New Fabric dialog shown in Figure 1 prompts you for your
username and password. Click the Add Fabric button to open the fabric.
Figure 1. Add a New Fabric
The opening window is displayed, as shown in Figure 3. For security reasons, you
will be prompted to change your user account password that was initially set up by
the administrator, as shown in Figure 2. You will be prompted to change the
password each time you attempt to open the fabric until you change the default
password. Click the OK button, and change the user account password. See
”Managing user accounts” on page 4-48 for more information.
Figure 2. Password Change Required dialog
6 IBM Flex System FC3171 8 Gb SAN Switch QuickTools User’s Guide