31.12.2014 Views

Chapter 1. IBM Flex System FC3171 8 Gb SAN Switch - QLogic

Chapter 1. IBM Flex System FC3171 8 Gb SAN Switch - QLogic

Chapter 1. IBM Flex System FC3171 8 Gb SAN Switch - QLogic

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Frame<br />

Data unit consisting of a start-of-frame (SOF)<br />

delimiter, header, data payload, CRC, and an<br />

end-of-frame (EOF) delimiter.<br />

Hard Zone<br />

Hard zoning divides the fabric for purposes of<br />

controlling discovery and inbound traffic.<br />

Inactive Firmware<br />

The firmware image on the switch that is not in<br />

use.<br />

In-band Management<br />

The ability to manage a switch through another<br />

switch over an inter-switch link.<br />

Initiator<br />

The device that initiates a data exchange with a<br />

target device.<br />

Inter-<strong>Switch</strong> Link<br />

The connection between two switches using<br />

E_Ports.<br />

LIP<br />

Loop Initialization Primitive sequence<br />

Logged-in LED<br />

A port LED that indicates device login or loop<br />

initialization status.<br />

Management Information Base<br />

A set of guidelines and definitions for SNMP<br />

functions.<br />

Management Workstation<br />

PC workstation that manages the fabric<br />

through the fabric management switch.<br />

Mesh Topology<br />

A fabric in which each chassis has at least one<br />

port directly connected to each other chassis in<br />

the fabric.<br />

MIB<br />

Management Information Base<br />

Multistage Topology<br />

A fabric in which two or more edge switches<br />

connect to one or more core switches.<br />

NL_Port<br />

Node Loop Port. A Fibre Channel device port<br />

that supports arbitrated loop protocol.<br />

N_Port<br />

Node Port. A Fibre Channel device port in a<br />

point-to-point or fabric connection.<br />

OK LED<br />

A switch LED that indicates that the switch<br />

logic circuitry is receiving proper DC voltages.<br />

Orphan Zone Set<br />

Zones that are currently not in a zone set are<br />

considered to be part of the orphan zone set.<br />

The orphan zone set is not an actual zone set,<br />

but rather a way of displaying the zones that<br />

are not currently in a zone set.<br />

Pending Firmware<br />

The firmware image that will be activated upon<br />

the next switch reset.<br />

POST<br />

Power On Self Test<br />

Power On Self Test (POST)<br />

Diagnostics that the switch chassis performs at<br />

start up.<br />

Principal <strong>Switch</strong><br />

The switch in the fabric that manages domain<br />

ID assignments.<br />

QuickTools<br />

<strong>Switch</strong> management web applet.<br />

SFP<br />

Small Form-Factor Pluggable.<br />

Small Form-Factor Pluggable<br />

A transceiver device, smaller than a GigaBit<br />

Interface Converter, that plugs into the Fibre<br />

Channel port.<br />

SNMP<br />

Simple Network Management Protocol<br />

Soft Zone<br />

Soft zoning divides the fabric for purposes of<br />

controlling discovery. Members of the same<br />

soft zone automatically discover and communicate<br />

freely with all other members of the<br />

same zone.<br />

<strong>Switch</strong> Fault LED<br />

A switch LED that indicates the status of the<br />

internal switch processor and the results of the<br />

Power On Self Test.<br />

106 <strong>IBM</strong> <strong>Flex</strong> <strong>System</strong> <strong>FC3171</strong> 8 <strong>Gb</strong> <strong>SAN</strong> <strong>Switch</strong> QuickTools User’s Guide

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!