IBOB Fan Header Modification Procedure - CASPER

ePAPER READ

DOWNLOAD ePAPER

casper.berkeley.edu

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

START NOW

IBOB Fan Header Modification 3

(v1.0) September 17, 2007

Characterization of 5Gsps ADC Demux 1:2 Board - CASPER

Jason Manley, Aaron Parsons, Dan Werthimer, Don ... - CASPER

Status, Capabilities, and Usage of the ATA Beamformer - CASPER

Beamforming for Antenna Arrays BEE2 vs DSP Processors - CASPER

Dan Werthimer - CASPER - University of California, Berkeley

UCT Software-Defined Radio Research Group - CASPER

Consequences of One Bit Quantization on Signal to ... - CASPER

Haystack/NRAO VLBI Digital Backend on the ROACH ... - CASPER

Remove the LED. Its through-hole footprint is suitable for a 0.100” header. On the underside of the board in the same vicinity is resistor R64, which also needs to be removed. R64 is connected in series between the 5V plane and the LED. IBOB Fan Header Modification 2 (v1.0) September 17, 2007

IBOB Fan Header Modification 3 (v1.0) September 17, 2007

Page 1: IBOB Fan Header Modification Proced
Page 5 and 6: Insert a 1×2 or 1×3 0.100” head

IBOB Fan Header Modification Procedure - CASPER

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?