Training package development handbook guidelines
Training package development handbook guidelines
Training package development handbook guidelines
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
When developers wish to provide advice about pre‐requisite requirements that are not units of<br />
competency from a <strong>Training</strong> Package, they should provide this advice in the Application of the unit<br />
field.<br />
EXAMPLE ‐ units<br />
The unit PMASUP236B Operate vehicles in the field has no pre‐requisites. However operators will<br />
have the appropriate class of driver’s licence before taking charge of the vehicle.<br />
12.1 Effect of pre‐requisites in qualifications<br />
The following example qualification from the MSA07 <strong>Training</strong> Package, asterisks the units that have<br />
pre‐requisites. The qualification notes that the pre‐requisites units are to be counted in the total<br />
number of units required. The note at the end of the qualification then refers the reader to the<br />
prerequisite table of the unit of competency, or the actual unit of competency for details of the prerequisites.<br />
EXAMPLE ‐ qualifications<br />
MSA60108 Advanced Diploma of Manufacturing Technology<br />
This qualification is comprised of 30 units of competency and would normally be delivered part time over a<br />
four year period. There are five mandatory units that must be completed for all specialist streams as well as 25<br />
electives.<br />
This qualification has two specialist streams available. These are:<br />
• Metallurgy<br />
• Polymer Technology.<br />
Note that prerequisite units must be considered when elective units are chosen.<br />
Packaging Rules<br />
To be awarded an Advanced Diploma of Manufacturing Technology competency must be achieved in 30 units<br />
chosen as specified below.<br />
Mandatory units (all specialist streams)<br />
The following five units are compulsory for all specialist streams in the Advanced Diploma of<br />
Manufacturing Technology.<br />
Unit code<br />
Unit title<br />
MEM16006A Organise and communicate information<br />
MEM16008A Interact with computing technology<br />
MEM23001A Apply advanced mathematical techniques in a manufacturing engineering or related<br />
environment<br />
MEM30012A Apply mathematical techniques in a manufacturing engineering or related<br />
environment<br />
MSACMT251A Apply quality standards<br />
Pre‐requisites<br />
Units marked with an asterisk have one or more prerequisite requirements. The pre‐requisites for these units<br />
are to be counted in the total number of units required in the elective group. Please refer to the prerequisite<br />
table for details.<br />
GuidelinesQualFrameworks_V3_June 2010 V3 June 2010 Page 22 of 28
Change language