AS-700, AS-710

1.2 Notes for the Use of this Manual
The following sections provide all the general information and explanations required,
in order to be able to carry out the subsequent tasks and procedures.
When some action is expected from the assembler or operator, the text is always
preceded by a dot, for example:
• First step.
• Next step.
Please, always read through to the action texts, so that you will obtain all of the
necessary information. Do not anticipate what you believe will follow in the manual:
It will prevent you from making mistakes!
Chronology and Reference
This manual is structured chronologically, and therefore ordered sequentially from
the receipt of the machine packed up to its ready-for-use state. This is followed by
information for operation, programming, and then finally technical data.
When you are unfamiliar with the machine, it is best to read through the manual
from beginning to end. You will be guided step by step, and in this way you can
easily and quickly have the machine in operation.
If you are already familiar with the PRINTER 700/710, it will make things easy if
you to use this manual as a reference work.
1.3 Important Terms and Abbreviations
There are a few terms and abbreviations you need to know, in connection with the
PRINTER 700/710:
• Cartridge = Crt + C.
• Print object width = Extension of the print object in the transport direction.
• Print object height = Extension of the print object crosswise to the transport
direction.
1.4 System requirements
The PRINTER 700/710 is designed for use on a PC (at least Pentium 200 MHz) with
parallel interface. It can be run with the Windows 2000 or Windows NT4 or Windows
XP operating systems.
The interface cable must be a shielded twisted-pair parallel interface cable (not included
in the delivery).
As an alternative, the printer can be connected with a USB cable, when using Windows
2000 and Windows XP.
8