AS-700, AS-710

8.3.1.6 Character Size
Character size (character height) refers to the height of a printed capital letter. It is
measured in pica points. A point is 1/72 of an inch.
The height for both fonts, with fixed and proportional character spacing, is measured
in pica points.
1
72 Punkte = 1 Zoll
Pica-Punkt
48 Punkte
(Zoll)
24 Punkte
12 Punkte
8Punkte
0
Illustration 8-7: Capital-LetterSize
8.3.1.7 Underline
In order to especially emphasize a point of text, you can underline it. Your uniform
font face is thereby maintained.
You can underline a single word.
8.3.1.8 Wide Font
The address image can be printed (e.g. for a large parcel) twice as wide, while
maintaining the proportional character width / spacing.
This is normal width.
This is wide font.
8.3.1.9 Character Spacing
In order to especially emphasize individual words, you can increase the space between
letters and words without changing the character size itself.
This E x a m p l e is printed voluminously.
8.3.1.10 Quality
Quality refers to the print quality.
You can make a selection among the following print qualities [dpi x dpi]:
75