AS-700, AS-710

More documents

Recommendations

Info

Error Messages Cause Remedy Font Loading ERROR:HEADER (F) Font Loading ERROR:FONT ORIENT Font Loading ERROR:CHAR. HEADER Font Loading ERROR:MEMORY (RAM) Font Loading ERROR: CHAR. No. Font Loading ERROR:SUPPL. CHAR. Font Loading ERROR: CHAR: LasFt Font Loading ERROR: DATA LasFt Font Loading ERROR:CHAR. HEIGHT Font Loading ERROR:DL DISABLED MACRO LOADING ERROR RAM MEMORY IS FULL! Macro Too High Reduce To 5 Inches Error in download font. Error in download font . Error in download font. Error in loading the font: insufficient memory Error in download font. Error in download font. Error in download font. Error in download font. Error in download font. Error in download font. Error in loading macro: memory is insufficient. Macro is too high. Check download font. Check download font. Check download font. No more space for the font in the memory. Check download font. Check download font. Check download font. Check download font. Check download font. Check download font. Macro no longer fits in the memory. Reduce graphic height to 38.1 mm. 66
7.2 Warning Messages Warning Message Cause Remedy Warning:Non-Existent Font Selected! Warning:Non-Existent Macro Selected! Error Macro ID Contact FlexSystems! Error Macro ID Report Err. 2 Vendor Position Warning! Reduce Left Margin! Warning:Wrong Data/ Barcode Selected! Error Barcode Data Contact FlexSystems! Error Barcode Data Report Err. 2 Vendor Macro Too Large Or Wrong Hor.Position! Macro Height Does Not Match! Macro ID# In Use Macro Load Ignored! Image Height Exceeds The Maximum Value Selected font does not exist in the printer. Selected macro does not exist in the printer. Error in FlexMail program. Error in FlexMail program Paper length or text position are wrong. Error in PC program. Error in FlexMail program. Error in FlexMail program. Macro too wide. Error in macro. Macro (same number) already exists, overwriting not possible. Print data outside of the printing area. Printer is switched off and the PC sends remaining data. After the job has ended, the addresses cannot be repeated. Faulty PC program. Contact your dealer. Contact your dealer. Check paper length, Reduce left margin in the PC program. Error in PC program. Contact your dealer. Contact your dealer. Comply with maximum width for macros you create: Graphic always upper left, then convert to macro. Delete macro, define it again. 67
Page 1 and 2:
PRINTER 700/710 USER'S GUIDE
Page 3 and 4:
© Copyright 2007 All rights reserv
Page 5 and 6:
5.3 Inserting the Ink Cartridge 5.3
Page 7 and 8:
1 Introduction With the PRINTER 700
Page 9 and 10:
2 Safety Notes For your own safety
Page 11 and 12:
Allow the Machine to be Inspected b
Page 13 and 14:
3 Transport and Packaging 3.1 Shipp
Page 15 and 16: 4 Printer Description 4.1 Machine O
Page 17 and 18: Illustration 4-3: PRINTER 700/710 b
Page 19 and 20: 4.2 Range of Application The digita
Page 21 and 22: 4.4 The Control Panel Illustration
Page 23 and 24: Meaning of the display 1 Job Counte
Page 25 and 26: 5.2 Installing the Driver for Your
Page 27 and 28: 5. Select the appropriate printer p
Page 29 and 30: 9. Choose wether or not you’d lik
Page 31 and 32: 5.3.1 Correctly Inserting the Ink C
Page 33 and 34: 5.3.3 Display for the Change of Ink
Page 35 and 36: For known print object thicknesses
Page 37 and 38: „NOR“ „REV“ 2 1 ADRESSE 3 1
Page 39 and 40: Note The print object must lie on t
Page 41 and 42: paper length measurement can be loc
Page 43 and 44: 6 The Programming - Offline Mode Th
Page 45 and 46: • Quick - Arrow Down = Clean Head
Page 47 and 48: Main menu Submenu Options Job Param
Page 49 and 50: Main menu Submenu Options Language
Page 51 and 52: Job Parameter Quality Selection of
Page 53 and 54: Format Designation P/E/ I 1 Sizes i
Page 55 and 56: • conventional: the position of t
Page 57 and 58: Ram Test All RAMs on the CPU are te
Page 59 and 60: Setting Selecting your own configur
Page 61 and 62: • SetD The 10 settings of the pri
Page 63 and 64: 6.5.2 Initialization of the Machine
Page 65: Error Messages Cause Remedy POSITIO
Page 69 and 70: 8.2.1 Centronics Parallel Interface
Page 71 and 72: 8.2.1.3 Pulse Diagram Illustration
Page 73 and 74: 8.3 Fonts 8.3.1 Terminology A font
Page 75 and 76: 8.3.1.6 Character Size Character si
Page 77 and 78: 8.3.2 Character Set A character set
Page 79 and 80: 8.3.3 Selection of the Fonts for Pr
Page 81 and 82: England (= UK7) ASCII: E c ( 1 E De
Page 83 and 84: Spain (= Spa7) ASCII: E c ( 2 S Dec
Page 85 and 86: Sweden/Names (= SwN7) ASCII: E c (
Page 87 and 88: PC-850 (= P850) ASCII: E c ( 12 U D
Page 89 and 90: PC-852 (= P852) ASCII: E c ( 17 U D
Page 91 and 92: Weight 23 kg 91
Page 93 and 94: Data transfer: Character size: DPl:
Page 95: Serial interface: Serif font: Setti
show all

AS-700, AS-710

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?