AS-700, AS-710
AS-700, AS-710
AS-700, AS-710
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7 Troubleshooting<br />
7.1 Error Messages<br />
Error Messages Cause Remedy<br />
NO PAPER !! No paper. Insert paper<br />
PAPER JAM OR<br />
WRONG PAPER LENGTH!<br />
NO INK !!<br />
CHANGE CARTRIDGE<br />
CHECKSUM ERROR!<br />
MAKE DEFAULT RESET<br />
CHECKSUM ERROR!<br />
MAKE COUNTER RESET<br />
CHECKSUM ERROR!<br />
TESTMACRO RESET<br />
CHECKSUM ERROR!<br />
SETTING RESET<br />
CHECKSUM ERROR!<br />
RESET PENVALUES<br />
TEST MACRO TOO LONG<br />
BUFFER OVERFLOW !!<br />
RAM ERROR !!<br />
VERIFY RAM<br />
UNPRINTED ADDRESSES!<br />
FINISH THE JOB<br />
PROGRAM ERROR<br />
MAKE DEFAULT RESET<br />
UART TIMEOUT<br />
RESET THE PRINTER!<br />
Paper jam.<br />
The cartridge is empty.<br />
Error in the buffered RAM.<br />
Error in the buffered RAM.<br />
Error in the buffered RAM.<br />
Error in the buffered RAM.<br />
Error in the buffered RAM.<br />
The user-defined test address<br />
is too long.<br />
Overflow of reception<br />
memory.<br />
RAM error on the CPU<br />
board.<br />
Addresses are not completely<br />
printed.<br />
Error in the program flow.<br />
Error in the UART chip or<br />
FET transistor.<br />
Check paper width.<br />
Insert a new cartridge and<br />
reset the counter.<br />
Factory setting<br />
(PROG key).<br />
Default factory setting<br />
(ONLY for technicians).<br />
Factory setting<br />
(PROG key).<br />
Factory setting<br />
(PROG key)<br />
Factory setting<br />
(PROG key).<br />
Be aware of the maximum<br />
length.<br />
Check connection to the<br />
PC.<br />
Replace the CPU board.<br />
Make no changes in the<br />
programming mode while<br />
a print job is in progress!<br />
Factory initialization - reload<br />
firmware<br />
Replace the CPU board<br />
Switch off printer.<br />
DISPLAY TIMEOUT<br />
RESET THE PRINTER!<br />
ERROR FPGA Ready<br />
CALL SERVICE<br />
CHECK CARTR.<br />
START TO CONTINUE<br />
Error with display controls.<br />
Error in FPGA-IC.<br />
Cartridge is not inserted.<br />
Check cable connection.<br />
Replace display unit.<br />
Replace the board.<br />
Insert missing cartridge(s).<br />
PRINTING ERROR<br />
REPEAT L<strong>AS</strong>T ADDRESSES Severe error. 64