AS-700, AS-710

OFFS. EDGE [mm] 0 0 0
CLEANING CYCLE 100 100 100
WARMING off off off
SERIAL INTERF. PC PC DISP
HANDSHAKE both DTR DTR
BAUD RATE 19K2 9600 4800
DATA LENGTH 8Bit 7Bit 8Bit
PARITY no even odd
STOPBIT 2 2 1
EMULATION
MACRO
DL FONT
PCL5
NO
NO
INK COUNTER 100%
ADDRCOUNTER 1581
RAM
Standard [2MByte]
REVISION V4.40 #2722
6.5.1 Example of an Application in the Programming Mode
You would like to set a configuration, changing the vertical line spacing from 6 lines /
inch to 8 lines / inch.
Switch the machine on.
Programming Mode
Press the "Offline" button.
Activate desired menu field
Change with the "Home" key in the main menu. Press the "Arrow Down" key and
select the menu "Job Parameter" and confirm with "Arrow Right" In this submenu,
you will find the menu "Font". Confirm it with "OK" and you get other sub menu.
With "Arrow Down" or "Arrow Up" move to the desired menu field i.e."Line spacing"
and confirm it with "OK".
With the "Arrow down" or "Arrow Up" key, you are able to set the parameter to "8".
Press the "OK" key. The changed value is saved in the configuration under the selected
"Setting No", and the machine is again in offline mode
or
press the "Online" key. The machine is again in online mode, so that the print job
can be resumed immediately.
62