AS-700, AS-710

Setting
Selecting your own configurations.
If you wish to operate the PRINTER 700/710 in various applications, then you will
possibly need to make some changes in the menu configuration. You can set up
various configurations yourself, and save these in the menu item "Setting".
Among the 10 configurations "No 0" - "No 9", 9 are available for your own configurations.
The first configuration, the "No 0", is reserved for the factory setting.
When this configuration is selected, pressing the "OK" and then the "Online" key
disables immediately the programming mode, and no changes may be made to this
configuration.
In order to be able to make changes to the configuration, select one of the remaining
9 configurations ("No 1" through "No 9"). When the programming modeis exited,
the changes are automatically saved in the selected "Setting-No".
The setting that is created can be locked immediately, when using the OK key to
activate “SETTING LOCKED“ setting, and with this same key you can select either
“yes“ or “no“.
After the machine has been switched off, the set configurations will remain.
In the menu item "Service", option "SetD", you can print out the active configuration
(see the "Service" description).
After the factory initialization via the "Quick" key (when switching on the machine),
all configurations are set to the factory settings.
You can also change Local Locking with locked setting.
The following menu items can be individually locked:
FONT
PRINT QUALITY
LEFT MARGIN (mm)
TOP MARGIN (mm)
TYPE OF BARC.
CHAR. SPACING
CHAR. HEIGHT
CHAR. WIDTH
LINE SPACING
ORIENTATION
PAPER SIZE
CHARACTER SET
PRINT MODE
When locking settings, incompatibility with software applications may
occur.
Examples:
When you lock the left margin, the application program implements absolute horizontal
positioning.
When you lock the orientation on REV, and the sequences for setting the position,
CONV with automatic ZIP-search cannot be carried out.
Other conflicts are also possible.
59