AS-700, AS-710

• conventional: the position of the barcode line is preset.
In the option "conv", the following settings are set:
• LEFT MARGIN: 94 mm
• TOP MARGIN: 51 mm
The barcode is indented 30 mm and printed in the eleventh line, meaning that the
space between the first address line and the barcode amounts to 10 line feeds (at
6 lpi).
It is possible to change the value for LEFT MARGIN and TOP MARGIN, in order to
adjust the address on the envelope to the desired position.
The correct positioning of the address is only guaranteed in the "Nor"
setting
Other Barcodes
When you confirm the barcode "2/5i", "coda", "co39" or "c128" with the ENTER key,
the following parameter setting is offered:
"SMALL WIDTH: 6"
SMALL WIDTH
You can set the width for the narrow line from 1 to 99 (Dots).
LARGE WIDTH
After the setting confirmation in the menu field "SMALL WIDTH" appears:
"LARGE WIDTH: 15"
You can set the width for the wide line from 1 to 99 (Dots) (c128 is the exception).
BARCODE HEIGHT
After the setting confirmation in the menu field "LARGE WIDTH" appears:
"BARCODE HEIGHT: 50"
You can set the height of the barcodes from 1 to 999 (Dots).
With one printhead movement, a maximum of 50 dots can be printed.
Other Barcodes
When you confirm barcode "ean" with the ENTER key, only the parameter setting
"BARCODE HEIGHT" – as described above – is offered.
Paper Sensor
In order to process print objects with black areas, you can switch off the paper
light barrier during printing. For this purpose, you must definitely set the format
size under PAPER SIZE (an incorrect format size can lead to printing outside the
paper area).
55