AS-700, AS-710
AS-700, AS-710
AS-700, AS-710
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Character Spacing<br />
You can change the character spacing by adding blank columns in dots from 0 to<br />
90.<br />
Character Set<br />
National character sets with their own special symbols for the corresponding foreign<br />
language (see Ch. 8.3.2, Character Set, on p. 82).<br />
Type of barcode<br />
Select a barcode using this menu.<br />
The following barcodes are available:<br />
ZIP-Barcode<br />
bpo4-Barcode<br />
2/5 interleaved-Barcode<br />
coda-Barcode<br />
co39-Barcode<br />
ean-Barcode<br />
kix-Barcode<br />
code128-Barcode<br />
When you confirm the barcode "ZIP" with the ENTER key, the following parameter<br />
setting is offered:<br />
" BARCODE OPTIONS: off "<br />
Barcode options<br />
(only for the USA !)<br />
You can select between the "off", "zip" or "dpbc" options.<br />
In the setting "ZIP" the 9 (or 5) numbers of the postal code are recognized from<br />
the "Zip lines", and the corresponding barcode (with checksum) is printed out. In<br />
this case, the address line with the "D LE " sequence is omitted (see Interface Description<br />
– Ch. 8 Zip-Barcode).<br />
The numbers for the postal code should be sent to the last line of the address. The<br />
postal code may contain a maximum of 9 digits and a minimum of 5 digits. Since<br />
the search for the numerical sequence begins at the end of the address, the last 9<br />
digits of a sequence are converted. It is permissible to add a hyphen between the<br />
fifth and sixth digits.<br />
In the "DPBC" setting, the program searches the house number at the start of the<br />
street line and adds this to the zip-barcode.<br />
The street line must be sent to the printer before the line with the postal code. The<br />
house number should stand at the beginning of the line. When the house number is<br />
made up of three digits, the last two are converted to barcode. In the case of house<br />
numbers with one digit, the number is prefixed with a 0.<br />
Barcode Position<br />
After selection confirmation in the menu field "BARCODE OPTIONS" appears:<br />
"BARCODE POSITION: top"<br />
The ZIP-Barcode position can be set with the options "top", "bot" or "conv". In this<br />
way, the position of the ZIP-barcode within the address block is set. The following<br />
variations are possible:<br />
• top: the barcode line is printed as the first address line.<br />
• bottom: the barcode line is printed after the last address line.<br />
54
Change language