AS-700, AS-710

Format Designation P/E/ I 1 Sizes in inches Sizes in mm
CRD2 Index Card 2 I 5 x 8 127 x 203
HAGA Hagaki I 315/16 x 513/16 100 x 148
B5 I 615/16 x 927/32 176 x 250
USER
The format length
can be entered in
mm
P min. 70 x 75
max. 435 x 1000
When you select a certain format size, then the top-margin value for both the "Nor"
and "Rev" directions is the same (Illustration 5-29: Layout orientation).
Left Margin
Using this menu, you can set the distance between the printing area and the first
printed character in a range of 0-168 mm for the Printer 700 and in a range of 0-
219 mm for the Printer 710.
When the PREV/NEXT key is continually pressed down, the changes occur in cm increments;
otherwise, in mm increments.
Top Margin
Using this menu, you can set the distance between the top of the print object and
the first printed line, in a range of 0-342 mm.
When the PREV/NEXT key is continually pressed down, the changes occur in cm increments;
otherwise, in mm increments.
Offs. Edge
Moving the edge 0 – 227 mm
With this, the measured paper edge is shifted. For the user, it would appear as if
the left margin would become enlarged. This menu item is necessary with:
• Window programs in which the left margin cannot (or should not) be
changed,
• Printing of large envelopes with Windows Mail Merge, when the desired
printing position cannot be set on the PC.
Example: Programs under Windows NT, for which there is no - PRINTER 700/710
driver
Font Parameter
Font
13 fonts or font sized have been built into the machine. A font selection can be
made here.
53