AS-700, AS-710
AS-700, AS-710
AS-700, AS-710
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8<br />
6<br />
5<br />
7<br />
= = =<br />
Illustration 5-31: Horizontal direction of the brackets<br />
Vertical alignment<br />
1. Lay the first print object (6) on the bracket between the separating finger (5)<br />
and the guide bar (8).<br />
2. Push the guide bar (4) up to the upper edge of the print object.<br />
3. Fan the print object in the way shown in the following illustration.<br />
4. Incline the bracket.<br />
5. The optimum inclination depends upon the print object length and width in<br />
the transport direction:<br />
• Short print object = steep inclination<br />
• Long print object = flat inclination<br />
6. Tighten the screw (7) again.<br />
3<br />
8 5<br />
7<br />
4<br />
Illustration 5-32: Vertical direction of the bracket<br />
5.4.3 Checking the Paper Transport<br />
Length measurement<br />
Carry out the length measurement of the medium to be processed by pressing the<br />
QUICK + ARROW RIGHT keys.<br />
Check the displayed value as compared to the actual value. When there is a variance<br />
between the two values (more than 3 mm), an incorrectly set paper feed<br />
could be the cause. When the software transmits the wrong paper length value, the<br />
40