AS-700, AS-710
AS-700, AS-710
AS-700, AS-710
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5.4.2.2 Left Margin<br />
(Left Margin)<br />
The left margin is the distance between the edge of the print object and the first<br />
printed character.<br />
The factory setting for this distance is 0 mm.<br />
If you wish to set another value, you can select a value for the distance, between 0<br />
& 160 for a Printer <strong>700</strong> and between 0 & 219 mm for a Printer <strong>710</strong>, in the programming<br />
mode (see chapter H6) in the menu "Left Margin".<br />
5.4.2.3 Top Margin<br />
(Top Margin)<br />
The top margin is the distance between the upper edge of the medium and the first<br />
line of print.<br />
The factory setting for this distance is 0 mm.<br />
When you select a certain paper size in the programming mode (see chapter H 6) in<br />
the menu "Paper Size", then the top-margin value for both layout orientations<br />
("Nor" and "Rev") is the same.<br />
Layout orientation NOR<br />
Layout orientation REV<br />
Illustration 5-29: Layout orientation<br />
1. Printing area<br />
2. Left Margin<br />
3. Top Margin<br />
4. Paper Size<br />
5. Transport direction<br />
If you wish to set another value, you can select a value for the distance, between 0<br />
and 342 mm, in the programming mode (see chapter H6) in the menu "Top Margin".<br />
You can also change the distance line by line, using the arrow keys:<br />
• Key = Top Margin increase by a line<br />
• Key = Top Margin decrease by a line<br />
To assure yourself of correctness, check the print position settings by carrying out a<br />
test print.<br />
5.4.2.4 Set the Sidelay Control<br />
5.4.2.4.1 Side guides<br />
1. Loosen the locating screws (4), set the side guides (1 and 2) to the width of<br />
your print object (3).<br />
38