AS-700, AS-710
AS-700, AS-710
AS-700, AS-710
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5 Start-Up and Operation<br />
5.1 Setting Up and Connecting the Printer<br />
Install the printer as described in chapter 2.3 - “Location of the Printer“.<br />
Power Cord<br />
See HIllustration 4-3: PRINTER <strong>700</strong>/<strong>710</strong> on page 18<br />
Caution!<br />
The PRINTER <strong>700</strong>/<strong>710</strong> is a device of class 1!<br />
The machine may only be operated on electrical circuits with protective<br />
grounding conductors (ground)!<br />
Connect the power cord to the printer. Stick the mains plug into a socket with protective<br />
contact.<br />
Change the fuses (also necessary when changing the mains voltage)<br />
Caution!<br />
When changing the fuse, you must in every case remove the power<br />
cord beforehand!<br />
Open the holding compartment with a fingernail or small pen. Change the fuse as<br />
shown in the following illustration.<br />
See chapter 8.5 - “Technical Data of PRINTER <strong>700</strong>/<strong>710</strong>“ – starting on page 95.<br />
Illustration 5-1: Changing the fuses<br />
Interface Cable<br />
If you wish to operate the printer via USB, then read through the<br />
chapter 5.2 “Installing the Driver“ starting on page 27 now.<br />
See HIllustration 4-3: PRINTER <strong>700</strong>/<strong>710</strong> on page 18<br />
Stick the interface cable into the connector at the back side of the machine (lock<br />
the parallel cable). Connect the cable with your computer.<br />
24
Change language